|
Click to See Complete Forum and Search --> : Matrox G400 IRQ change Jody Marshall November 17th, 1999, 09:29 AM I have a G400 with lots of problems. Matrox told me to change the IRQ from 5 that is shared with sound to an open IRQ 10. However windows will not allow me to change it. What do I have to do to change the IRQ setting. Please help Tokamar November 21st, 1999, 06:23 PM Not sure what motherboard you have but check in your bios. Sometimes you can change the IRQ add. from there. Tokamar November 21st, 1999, 06:29 PM One more thing. My IRQ is 11 for my v330 AGP video card...maybe try that one. But first check to see if anything else is using that one. Paul Cunningham November 22nd, 1999, 05:01 AM Try to change the IRQ on your soundcard to 5, if it lets you then the Video card will be forced to take another IRQ when you reboot. stevet November 24th, 1999, 05:09 PM You might try disabling one of your on-board com ports. That would free up IRQ3 or 4. In my experience, it seems like the video grabs the lowest IRQ available at boot-up. That's why it is using 5. The video card might change to IRQ3 or 4 if one of them were available. ------------------ Steve Taylor - Service Manager Altoplanos Information Systems, Inc. Coeur d'Alene, Idaho USA www.altoplanos.net (http://www.altoplanos.net) windrivers.com
Copyright WebMediaBrands Inc., All Rights Reserved. |
|