Alton Monitor

[mannyp]

I have a monitor that says Alton on the bottom left hand corner...It works but the colors are fuzzy and the general display is not optimal...this is what it says on the back...
Product No. AL - 1410E
Model 462
FCC ID IJE572
PC WARE INTERNATIONAL

I can't find the drivers for it...
Please help me

thanks in advance...

Manny
aspccs@telcel.net.ve

[Silverman]

Proview manufactured the monitor for PCware http://www.proviewintl.com/doc/dwn.html

[mannyp]

Thank you very much for answering....ok I located the numbers (no names) on the chips but first of all I don´t know which one you need....there are two chips that are the same size and one that is thicker but smaller....and second I went to your page and don´t know where to look or write the numbers you told me to....well anyway here are the numbers....tell me which one I should use or if you don´t know just tell me where to look for drivers for them on your page...
chip 1: PCT301L
99378ACA65
chip 2: PCT301D
9938CAAC79
chip 3: KP1010

Thanks again for your help

Manny P

[Silverman]

Originally posted by Manny P:
<STRONG>Thank you very much for answering....ok I located the numbers (no names) on the chips but first of all I don´t know which one you need....there are two chips that are the same size and one that is thicker but smaller....and second I went to your page and don´t know where to look or write the numbers you told me to....well anyway here are the numbers....tell me which one I should use or if you don´t know just tell me where to look for drivers for them on your page...
chip 1: PCT301L
99378ACA65
chip 2: PCT301D
9938CAAC79
chip 3: KP1010

Thanks again for your help

Manny P</STRONG>

Are you sure you have posted back to the correct forum in referance to these chips? I thought we were discussing an Alton/Proview monitor.

[mannyp]

Yes you´re right...I did make a mistake...I posted the message on the wrong board...this is because I have several hardware problems and I was looking for helo on a modem...I´m on that right now...
Anyway I went to proview´s homepage and was unable to download the driver...some error on their server, but I did email them...still waiting...Thank You very much for your help...

Manny P

Originally posted by Silverman:
<STRONG>

Are you sure you have posted back to the correct forum in referance to these chips? I thought we were discussing an Alton/Proview monitor.</STRONG>

[Silverman]

I downloaded the proview inf last night O.K. I can try it again and email it to you.