Daewoo MotherBoard |With Ge-force 2 MX

[dreamscape_63]

Will the daewoo motherboard take a ge-force 2 mx i have asked a m8 who works with comps and he says it could blow the mother board but he aint sure if any knows anymore about this plz help me out.
CPU: Celeron 400
RAM: 64Mb

BTw it is an Intel chipset on the mobo if that any help 2 yah! Thx in advance if anyone can help me. http://forums.windrivers.com/cgi-bin/forum/smilies/cwm20.gif

[This message has been edited by dreamscape_63 (edited February 04, 2001).]

[Silverman]

Does the Daewoo board have an AGP slot? If not than you will need to find an MX card in the PCI flavour. as far as an MX Vid card blowing up the motherboard, I wouldn't worry about that to much as long as you buy a new one and not someone elses used hardware that was overclocked to death. I have 2 MX cards and an older M64 (YUCK) installed in the systems at home in various machines all running fine. The first thing I would do if in doubt is check your computer manufacturers websight and see if The MX will run on it.