kpreston
January 8th, 2001, 10:24 PM
I need to know how to get IRQ Steering to work properly. In PCI Bus properties under the IRQ Steering Tab and in the IRQ Routing Status box I have the following;
IRQ Steering is Disabled (Yes, the Use IRQ Steering box has a check mark in it). It gives the following reason;
IRQ Table has some errors.
I running a fic mobo(v503+) with a via chipset and have tried all the drivers from them but nothing works.
So how do I fix this. If you need more info let me know, Thanx in Advance
IRQ Steering is Disabled (Yes, the Use IRQ Steering box has a check mark in it). It gives the following reason;
IRQ Table has some errors.
I running a fic mobo(v503+) with a via chipset and have tried all the drivers from them but nothing works.
So how do I fix this. If you need more info let me know, Thanx in Advance