Wile
August 17th, 2000, 12:47 PM
Having a slight issue here. Whenever I enable the PCI->USB Controller, Windows freezes at the "Windows is shutting down" screen and doesn't complete the powerdown or restart.
From what I can tell, there are no conflicts with the controller (running IRQ 9). Initially, Windows detected and installed Intel drivers for the controller. I went into Device Manager and changed the drivers to the Standard PCI->USB Controller ones. This allowed the machine to shutdown properly one time. I then re-enabled the USB Root Hub and the system froze once again on the Shutdown screen. After that, even the Standard PCI->USB Controller drivers don't allow the machine to shutdown completely.
Any help/tips would be greatly appreciated here.
Thanks
From what I can tell, there are no conflicts with the controller (running IRQ 9). Initially, Windows detected and installed Intel drivers for the controller. I went into Device Manager and changed the drivers to the Standard PCI->USB Controller ones. This allowed the machine to shutdown properly one time. I then re-enabled the USB Root Hub and the system froze once again on the Shutdown screen. After that, even the Standard PCI->USB Controller drivers don't allow the machine to shutdown completely.
Any help/tips would be greatly appreciated here.
Thanks