Professor89
February 28th, 2000, 01:48 PM
How do you make a dos boot disk to an nt domain\workgroup
Click to See Complete Forum and Search --> : dos boot disk to an nt domain
edubiel@centuryco.com
March 28th, 2000, 10:31 AM
Get ahold of an NT Server 3.51 CD. There is a clients folder on the cd. There is a dos client which you can install to a boot floppy over IPX, TCP/IP, or NetBEUI. You can also specify domain/workgroup. Try to use a mainstream Network card if possible for ease of use.
houseisland
March 28th, 2000, 10:37 PM
The same DOS client stuff is on the NT Server 4.0 cd as well.
Make sure that your NIC in the machine that will be booting to DOS to join the NT network is a supported model. There are only a chosen few NICs that will work, and there is no easy way to install drivers other than those supplied with the DOS client package.
Correct me if I am wrong here. Please, please, please correct me.
Make sure that your NIC in the machine that will be booting to DOS to join the NT network is a supported model. There are only a chosen few NICs that will work, and there is no easy way to install drivers other than those supplied with the DOS client package.
Correct me if I am wrong here. Please, please, please correct me.
windrivers.com
Copyright WebMediaBrands Inc., All Rights Reserved.
Copyright WebMediaBrands Inc., All Rights Reserved.