PC Cases

[vipervenom69]

I'm pretty new at this stuff so I don't know too much but what kind of case do I get for the P3's and P4's, an AT or ATX?

[Riker!]

Your after an ATX case. Cause all the PIII and P4 mobos will be ATX. AT is a dead form factor.

------------------

[Fistmaster]

Glad its dead,I hate it when the m*f****** wriggling about, makes it hard to stuff the mobo in...
http://forums.windrivers.com/cgi-bin/forum/smilies/cwm44.gif

------------------
_ ___________________ _
Windows, what you throw your PC out of

[MDD1963]

<<Cause all the PIII and P4 mobos will be ATX. >>

The P4 uses/requires a format called ATX12V if I'm not mistaken....exra power connector on MB for supplying an extra power source for cpu. You will be out of luck with a p4 and a standard ATX case.

[DaOnly123Kid]

<font face="Verdana, Arial" size="2">Originally posted by MDD1963:
<<Cause all the PIII and P4 mobos will be ATX. >>

The P4 uses/requires a format called ATX12V if I'm not mistaken....exra power connector on MB for supplying an extra power source for cpu. You will be out of luck with a p4 and a standard ATX case.</font>


i believe you are correct, the best case for the p4 i have seen is the one made by inwin

[Sparky625]

If you're getting a P3, I love cases by Antec. They're good about sharp edges, have good stand-on-ability http://forums.windrivers.com/cgi-bin/forum/smilies/cwm4.gif and usually have great accesibilty features. I've got a <a href="http://www.apushardware.com/?action=hardware&id=5">SX1030</a>, only black. It's groooovy. http://forums.windrivers.com/cgi-bin/forum/smilies/cwm7.gif

------------------
Thank you for calling the support desk! How may I disconnect you today?

[techman17]

<font face="Verdana, Arial" size="2">Originally posted by Riker!:
Your after an ATX case. Cause all the PIII and P4 mobos will be ATX. AT is a dead form factor.

</font>
The AT form factor isn't dead. Ever look at TigerDirect or anything similar. True, ATX is the industry standard but I see alot of AT motherboards at the local PC store. Shuttle makes a good AT board!



------------------
He who gives up liberty for security gains neither --Benjamin Franklin

[arcade]

<font face="Verdana, Arial" size="2">Originally posted by Sparky625:
If you're getting a P3, I love cases by Antec. They're good about sharp edges, have good stand-on-ability http://forums.windrivers.com/cgi-bin/forum/smilies/cwm4.gif and usually have great accesibilty features. I've got a <a href="http://www.apushardware.com/?action=hardware&id=5">SX1030</a>, only black. It's groooovy. http://forums.windrivers.com/cgi-bin/forum/smilies/cwm7.gif

</font>

I just bought an antec performance series 1040, it's brill. 4 fans, clip in 5.25 peripherals, 300w p/s. pity the 400w p/s version was not available.
the only thing about black, is the peripherals are all standard "cream/grey" !!!
now wouldn't it be good if they were like mobile phones; covers you could change yourself? http://forums.windrivers.com/cgi-bin/forum/smilies/cwm1.gif