Click to See Complete Forum and Search --> : [RESOLVED] Toshiba 2515CDS notebook


wannaBEnerd
September 30th, 2001, 02:36 PM
I got this thing from a friend.... I cant get into the BIOS cause there is a password, and my friend dont remember what it is.... How do I disable the password on this thing(Toshiba 2515CDS)

dlagace
September 30th, 2001, 02:45 PM
Remove the Battery on the board for five minutes. or fing the Clear cmos jumper.
But you have a Notebook so I can't be sure if these things will work for you.

http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modItemList.jsp

Go here for the manual. to find the Jumper.

------------------
http://www3.sympatico.ca/corey.reynolds/avatars/cdnflag2.gif "What works for One person May not work for Another"
God Is My Judge dLagace=DANIMAL

[This message has been edited by dlagace (edited September 30, 2001).]

cc_penguin
September 30th, 2001, 05:09 PM
There is no jumper on the Toshibas. To remove a password you have to have a parallel loopback that has some of the pins looped together. I have the pinout at work and Ill post back Monday if you like (that is if I can find it) All ya gotta do is turn the machine on with the loopback and it will remove the password.

------------------
http://www.supagraphix.homestead.com/files/july4flag1.gif

Damned Angel
October 1st, 2001, 05:57 PM
good thing I never threw out the paper with the pinout on it.

2-32
1-13
31-10
36-11
14-12


put that on the parallel port and start the machine holding the esc key. this will get you into the bios and let you remove the password.

------------------
<a href="http://www.georgecarlin.com/" target="_blank"> "we're all amateurs, it's just that some of us are more professional about it than others"</a>
----George Carlin

cc_penguin
October 1st, 2001, 06:11 PM
Thanks Damned Angel. I looked all day for that and couldnt find it anywhere http://forums.windrivers.com/cgi-bin/forum1/noncgi/frown.gif

------------------
http://www.supagraphix.homestead.com/files/july4flag1.gif

wannaBEnerd
October 2nd, 2001, 08:06 PM
Hey, thanks for the info.... I got my soldering Iron and solder, now all I gotta do is get a parallel plug and some wires..... Thanks again... http://forums.windrivers.com/cgi-bin/forum1/noncgi/cwmsmilies/cwm9.gif