CD Rom Driver (reinstall)

[mikoes]

How can i recover my CD-Rom driver?
When i try to play a cd, i get message (no CD- Rom player attachedto this computer-cd player cannot start.
When i go to device mngr.& click on my secondary IDE controller( which has a yellow icon over the c/drive icon)and then open propertiesi get Message-DEVICE STATUS-this device is either not present,not working properly,or does not have all the drivers installed (code 10),Try upgrading.
I tried to update - windows says best drier installed.
Additional info- My sys= Hp6640c / Win98se
secondary IDE dual fifo controller(parent device= sis5513 dual pci ide controller.
Any help appreciated- MIKOES

[lycia69]

Have you recently moved the Drive? I had a problem where I had reinstalled the drive into the case but I didn't attach the IDE cable firmly into the drive. Make sure all connections are firmly set.

[Darren Wilson]

Run REGEDIT and search for NOIDE. If found delete it or set the value to '0' and reboot. If this doesn't solve it then check for Boot Sector viruses from a clean Bootable Anti-Virus disk.

------------------
'I won't deny ya, I'm a straight Ridah, You don't wanna f#@k with me'
Tupac Shakur
'*****ionz as a Ridah'
All Eyez On Me
CD 1 Track 1.

[condor]

Some CD-ROM drivers will not work if they are Slaves and there's no master on the IDE channel.

Make Sure you Drive is setup as Secondary Master or Primary Slave.

------------------
Computers do exactly what you tell them to do - not exactly what you want them to do ...

[KWB Teck]

While your checking Darrens suggestion also look in "Hkey_Local_Machine/Enum/MF" and see if there are multiple entries. If so delete the MF tree and reboot.

[DonJ]

Hi,

HP's website for your Pavilion is located here:

http://www.hp.com/cposupport/swindexes/hppavilion19152_swen.html

There are firmware upgrades at the bottom of that page. Might be somthing to check into...

Good Luck!
DonJ


------------------
Hey, it's all FM to me!