[RESOLVED] Generic Win95 Driver for IDE CD-ROM

[Petercip]

I received a machine that had a network install of Win95, meaning no cabinet files were installed so I cannot install my Toshiba XM-6402B CD-Rom drive. I need the generic ATAPI/ASPI Driver(inf file) which is built in Win95. Is there anywhere to get this generic driver or is it impossible.
Thanks

[CompuDocs]

Not familiar with that particular model, but if it's IDE, just make sure that you have it set correctly with the jumpers (master/slave) and windows should detect it.
If it is not a slave to the hdd, and on the secondary port, make sure the port is enabled in the bios.

Good luck,

Charlie

[Mustang]

you can get a generic oak technologies driver for ide atapi drives from this site