Supermicro P6sbu atx strange boot

[sradicator]

I have mounted in a pc a P6SBU with only SCSI peripherals (Cd, Jaz & Hd). No Ide.
On boot the message is: pri master drive atapi incompatible.
Boot sequence in bios is floppy,scsi,disabled.
I tried to disable on board ide, but the result was that the mobo stops on the "wait..."
I have missed some settings? Pri ide is set on "auto".

[schultzz]

You have no IDE devices? Then it appears your BIOS is looking for one but can't find it, poor thing - thus the WAIT... message. See if there is a way to disable the primary IDE setting in the BIOS...it appears AUTO is not going to do it. I suppose there could also be a jumper setting for this?

[sradicator]

Thanks master, all resolved