HP 755CM plotter

[Masaak]

Hi, my problem with this plotter is that at the time I print it gets very pixelated.
Only the solid color as yellow magenta, cyan and black are good but the palettes do not look right.

I have win2K and I was told from HP to put it in WIN98 so I had to get a newHDD and instal win98 to see if my plotter would work better on that OS but still.

Any help around please i will really appreciate it.

[DonJ]

Hi Masaak, WelCome to WinDrivers!

In case you haven't already done so, you can find downloads for your 755CM DesignJet for Win2K here. (http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=12666&locale=en_US&taskId=135&prodSeriesId=25252&prodTypeId=18972&swEnvOID=181)

You might also want to read up on HP Designjet 700 Series Printers - Solving Print-Quality Problems (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&taskId=110&prodSeriesId=25252&prodTypeId=18972&objectID=bpp02108)

And, maintenance and cleaning - HP Designjet 700 Printer series (http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?locale=en_US&taskId=125&prodSeriesId=25252&prodTypeId=18972&supportTaskId=2943) Several diff documents to choose from.

Lastly, make sure that you are using Supported HP Ink Cartridges (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpp02548&prodTypeId=18972&prodSeriesId=25252&locale=en_US)

Hope this helps you out. Let us know how it ends up...Good Luck!

[Stalemate]

Do you use some sort of colour management software to balance what you see on screen with what is printed?

[Masaak]

[B]Well i am going to check every one of the things you just tellme to see, later on, actually i was using Photoshop 7, and also was using WideImage.

The thing is that i am going to see if the tray inside the plotter is good or not, at the time I print the palttes from the plotter comes pixelated.

I am checking now .. thanks and I will be back with results.