Click to See Complete Forum and Search --> : Norton ghost 10 no exe
xpuser357
April 28th, 2007, 11:22 PM
I had backed up my old drive with norton ghost, 9 DVD`s it took to back it up
I had went into bios to boot sequence, selected cdrom as first boot.
I receive message system halted right off the bat. Any Ideas would be
helpful.:wave:
Platypus
April 29th, 2007, 07:37 AM
Well I use Acronis TrueImage, so I'm not clear exactly how Ghost does it. But unless Ghost makes the first disk of a set bootable, with a restore application, the disks will just be a compressed image of the drive contents. You'd need a bootable Ghost CD (I use a bootable Acronis CD), or to connect the drive to a system with Ghost installed to restore the image. If the first disk should be bootable, but you get the "Operating system not found, system halted" message, it may be corrupted... :knife:
Have you been able to do a restore successfully before? Will the system boot OK from a known good bootable DVD?
xpuser357
April 29th, 2007, 09:08 PM
Well I use Acronis TrueImage, so I'm not clear exactly how Ghost does it. But unless Ghost makes the first disk of a set bootable, with a restore application, the disks will just be a compressed image of the drive contents. You'd need a bootable Ghost CD (I use a bootable Acronis CD), or to connect the drive to a system with Ghost installed to restore the image. If the first disk should be bootable, but you get the "Operating system not found, system halted" message, it may be corrupted... :knife:
Have you been able to do a restore successfully before? Will the system boot OK from a known good bootable DVD?
No I guess Iam sol I have ghost still on my new drive.160 gig.
On my 80gig is where I wanted to reinstall with norton 10. I hope Ghost does not have a 1 year plan. Be out of date:)
slgrieb
April 29th, 2007, 11:17 PM
Ghost 10 requires you to boot from the Ghost installation CD to restore your image. Is that what you're doing, or are you trying to restore directly from the backup disks?
xpuser357
April 29th, 2007, 11:43 PM
Ghost 10 requires you to boot from the Ghost installation CD to restore your image. Is that what you're doing, or are you trying to restore directly from the backup disks?
Thanks for responding:wave: I have 9 disks of 4.3 gigs each I have them labled 1thru9 I was just using backup disks. Are you saying I can use norton
cd on a clean hard drive with no operating system. to restore back to
where I backed up computer???????:)
Ferrit
April 29th, 2007, 11:52 PM
Yes thats what the cd is for
It boots you to an enviroment where it asks you where the backup files are
IE: harddrive,dvd`s,cd`s
Show it where the first 1 is and away it will go and it will put it back wherever you want.