Click to See Complete Forum and Search --> : Scan disk everytime !!
subah
September 20th, 2008, 05:40 PM
Hello everyone,
my problem is i have 3 hard drive in my pc
1- OS only
2 & 3 - date
every time i start the windows it is ask my to scan disk for number 3 !!
i let it meny time to scan it and i was think it will stop asking that but it do not ?
the weird thing is that disk number 3 it is not OS drive so why is every time it is ask to scan it ?
Ferrit
September 20th, 2008, 08:04 PM
The usual explanation is that something is wrong with that drive.I would figure out who the manufacturer uis and download their diagnostic software.
Test the drive .
Also just to see disconnect that drive and trying booting up a couple times to see if any oher drive does it.
subah
September 21st, 2008, 06:40 AM
The driver is WD, and i try to disconnect the driver after booting the system it is not asking me for the CHKDSK ?
i try this command to stop the scaning it is work with me but i don`t know if it is solve the problem or not !!
run command chkntfs /x f:
Ferrit
September 21st, 2008, 11:23 AM
Choose your type of drive and download the diagnostic tools and test the harddrive to see if it has any problems.
http://support.wdc.com/product/download.asp?level1=5&lang=en
subah
September 21st, 2008, 01:43 PM
Thank you for you help
i try the first test "Quik test" and it was pass ??
Ferrit
September 21st, 2008, 10:25 PM
I am not familiar with the WD testing software but there must be some long test
subah
September 22nd, 2008, 06:51 AM
Ok please can you see the folowing picture and tell me if you see anything wrong ?
http://img212.imageshack.us/img212/5352/diskkl0.jpg (http://imageshack.us)
Ferrit
September 22nd, 2008, 11:35 AM
That is not the Western Digital testing software.
That is Windows Disk Management
It is not a testing program
subah
September 22nd, 2008, 03:58 PM
I knew that i just asking is there anything strange in the Windows Disk Management ?
subah
September 25th, 2008, 06:52 AM
Hello !!
NooNoo
September 25th, 2008, 06:55 AM
Subah, sometimes chkdsk has to be run and then for some reason keeps running. Your disk is likely to be fine if the diagnostic from WD said it was.
From the disk management, it is not a good idea to have 3 volumes labelled the same.... at least put a 1,2 or 3 after each name!
subah
October 7th, 2008, 01:17 PM
Subah, sometimes chkdsk has to be run and then for some reason keeps running. Your disk is likely to be fine if the diagnostic from WD said it was.
From the disk management, it is not a good idea to have 3 volumes labelled the same.... at least put a 1,2 or 3 after each name!
Thank you NooNoo for the Advice i do it :)