PDA

Click to See Complete Forum and Search --> : 4870 only goes upto 1600x1200 WHY?

Vakas
February 20th, 2009, 04:17 PM
why cant i get 1680x1050 with this card? Its a asus 1gb tried the latest drivers different cables using a viewsonic vx3522wm anyone got any ideas
Platypus
February 20th, 2009, 06:30 PM
A VX2235wm?
Have you installed the Viewsonic driver (http://www.viewsonic.com.au/downloads/files/displays/Standard_Monitor_Driver_Signed_Vista_x64_070305.zi p)?
Ferrit
February 21st, 2009, 11:48 AM
Drivers wont help I dont think.
Thats the max setting of the monitor anyway
Specs for this monitor are

Display Type: TFT LCD

Pixel Pitch: 0.282 mm

Display Colors: 16.7 million

Input Video Signal: 15-pin D-sub
DVI-D

Contrast Ratio: 700:1

Brightness: 280 cd/m²

Response Time: 5 ms

Horizontal Viewing Angle: 170 degrees

Vertical Viewing Angle: 160 degrees

Maximum Resolution: 1680 x 1050

Cabinet Color: Black/Silver

VESA Mounting Compliant: Yes

Dimensions With Stand: 20.6" x 19" x 9.6"

Unit Weight: 13.2 lbs.

Power Consumption: 48W

http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=2884801&CatId=2775
Vakas
February 21st, 2009, 06:43 PM
I have got the resolution soted and have got the monitor working on DVI

The games and movies display fine but the windows desktop and other aalications and not clear the screen is kind of fuzzy and you can see little lines across the display.

Is this normal or is this monir sa problems my 19'' monitor and 12x1024 is fine.

Is tihs my 22'' monitor causing hte issue here or is there a seeitng or is it meant to be like this
clauded
February 21st, 2009, 07:18 PM
what is the refresh rate?that`s were the drivers come in handy it will stop the card from setting to high a refresh rate i am using an acer al2216wx and the refresh rate is set to 60herth and my picture is perfecti have 2 9600gt in sli with 512 megs eaCH so 1650x1050 is no problem
CCT
February 21st, 2009, 07:27 PM
'I have got the resolution soted and have got the monitor working on DVI'

Does this mean you have Forced the settings somehow? Or what?

If they have a factory preferred setting that they say is max, that is the setting that is MAX!

Quite often, a lower setting is actually easier to 'see'.
Vakas
February 21st, 2009, 08:32 PM
Well i got the resolution up from the ati catalyst software and the monitor was not working on DVI so I just unpluged its power and cables and plugged them back in and it worked fine.

I don't know if the ATI software has caused the monitor to do this but the monitor has a max resolution of 1680x1050 so why was it not showing it at first???
CCT
February 21st, 2009, 08:54 PM
IF you had a Nvidia card before sometime and didn't clean out all the drivers that could cause problems.

If you upgraded the Catalysts and didn't get rid of old drivers, maybe the same thing.

Drivers, as you can tell by the name of this site, are FUNNY!

:)
Vakas
February 21st, 2009, 09:21 PM
I have tried 2 other monitors and they are crystal clear so it cannot be the drivers can it?

does anyone know where I can find a review on a viewsonic VX2433wm monitor?
Ferrit
February 22nd, 2009, 04:33 PM
http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=2884801&CatId=2775
There are some minor reviews on the bottom of that page with a link to more.
geoscomp
February 22nd, 2009, 10:27 PM
I have tried 2 other monitors and they are crystal clear so it cannot be the drivers can it?

does anyone know where I can find a review on a viewsonic VX2433wm monitor?

sure..unless the other monitors are the same viewsonic ones..there are video drivers and there are monitor drivers..your monitor driver is here:

http://www.viewsonic.com/support/downloads/drivers/?prod_name=vx2433wm&x=29&y=9