Soundcard

[Adrian Smith]

I have a Breve soundcard and I have found the drivers for it but the jumpers on the card don't seem to be set correctly. port- etc. any ideas
many thanks

[AlienDyne]

First of all go to Device Manager and check for free memory and IRQ resourses on your system. Then shutdown, pull the card out and setup the correct jumper settings. Use resourses that are not used by any hardware device.

Good luck.

------------------
"Matter is passive. In spite of its power, it can't be controlled without the human mind." Sokrates

My Hardware Info, Hardware Media and Computer History page (http://www.geocities.com/alienhardware)