Hello evry one can any one help my with usb2 driver for OS XP pro ans my mother bord is (Intel D865PERL)
Printable View
Hello evry one can any one help my with usb2 driver for OS XP pro ans my mother bord is (Intel D865PERL)
Subah, XP Service Pack 2 shouldn't need additional drivers for USB 2 with this board. If you have recently re-installed Windows, installing SP2 should fix this.
me xp is sp2 , but its seems to me not support the speed of usb2 ???
Make sure you have USB 2.0 enabled in your BIOS.
:)
It is enabled and in full speed , when i change it to Hi speed its seems to me the pc not found my usb flash memory , while in another pcs the same flash work fine with the usb2 ?Quote:
Originally Posted by CCT
the file that take 10 min in usbs , take 30 min in my usb :mad:
Thanks OMGmissinglink for trying to help me , finally i found the drive and now all ports are work as usb2 :)
Thanks alot , and the problem is solved :D
It is strange, but many computers have 1.1 ports in the front and 2.0 in the back.
As suggested, try different ports.
Since XP SP2 supports 2.0, you can always try a SFC/ Scannow to check drivers.
Thanks CCT for your suggestion :)
See if this helps Subah
Enabling USB 2.0 Support
Quote:
To Enable USB 2.0:
Reboot (or power on) system.
Press "F2" during POST (Power-on Self Test) to enter system BIOS setup program.
Select "ADVANCED" menu using arrow (left and right) keys.
Select "USB Configuration" and press <enter>.
Enable "High-speed USB".
Press "F10" to Save & Exit BIOS setup program. ( Hi-Speed USB 2.0 controllers are now enabled and your operating system should detect New Hardware during the next normal boot cycle.
Cancel "New Hardware Found".