Multimedia Audio Controller not working (again, sorry guys!!)

Glad to see i'm not the only one suffering!! Problem seemed to stem from downloading the new WM Player.

OS: Windows XP Home Ed, SP2
Notebook: Higrade Notino, W6700

Everest Report Results:

Motherboard Properties:
Motherboard ID <DMI>
Motherboard Name HIGRADED 8060B

Front Side Bus Properties:
Bus Type Intel NetBurst
Bus Width 64-bit
Real Clock 100 MHz (QDR)
Effective Clock 400 MHz
Bandwidth 3200 MB/s

Memory Bus Properties:
Bus Type DDR SDRAM
Bus Width 64-bit
Real Clock 133 MHz (DDR)
Effective Clock 267 MHz
Bandwidth 2133 MB/s

Chipset Bus Properties:
Bus Type Intel Hub Interface
Bus Width 8-bit
Real Clock 67 MHz (QDR)
Effective Clock 267 MHz
Bandwidth 267 MB/s
__________________________________________________ _______________

Audio:
AC'97 Audio Controller:
Audio Controller Type Intel 82801DB(M) ICH4
Codec Name Avance Logic ALC202(A)
Codec ID 414C4740h
S/PDIF Output Supported
__________________________________________________ _______________


Ok the situation is that I have no sound. In device manager there is the yellow warning sign and its Code 1, not configured correctly - reinstall drivers for device. Which I unfortunately do not have.

I've tried searching for drivers online, but no luck. Can someone help?

Cheers

James

Try: http://members.driverguide.com/index...02&qa5=19&sm=s

Welcome to Windrivers JamesYates

here are ALL your notebook drivers

If you need help installing them, post again.

Hey guys, thanks for coming back to me. Ok, we have solved one problem. When I boot up, installation wizard no longer pops up because it has detected new hardware. Which is good because it must be now installed.

I've gone to turn on sound using Vol Control in accessories and get the following:

"There are no active mixer devices available. To install mixer devices, go to Control Panel,
click Printer and Other Hardware, and then click add Hardware."

Maybe i haven't installed properly? Any suggestions?

Thanks again,

Certainly! Be sure your XP cd is in the drive (close out the little splash screen that opens when you insert it) and then click the Start button, click Run, then type sfc /scannow into the Open: command box. Follow onscreen instructions.

I got the same issue here (Code 1) error.

as slgrieb said, i did insert the xp cd and ran sfc /scannow from command box. it jus verified all windows files n just closed itself. i got no onscreen instructions.

Please help me wit it !

Quote:

---

Originally Posted by jamesyates

Hey guys, thanks for coming back to me. Ok, we have solved one problem. When I boot up, installation wizard no longer pops up because it has detected new hardware. Which is good because it must be now installed.

I've gone to turn on sound using Vol Control in accessories and get the following:

"There are no active mixer devices available. To install mixer devices, go to Control Panel,
click Printer and Other Hardware, and then click add Hardware."

Maybe i haven't installed properly? Any suggestions?

Thanks again,

---

It means your drivers didn't install properly. Which driver set did you use and how did you install them?

Quote:

---

Originally Posted by zorif

I got the same issue here (Code 1) error.

as slgrieb said, i did insert the xp cd and ran sfc /scannow from command box. it jus verified all windows files n just closed itself. i got no onscreen instructions.

Please help me wit it !

---

Welcome to Windrivers Zorif

Do you have exactly the same noteboook? If not, what computer do you have?