Printable View
How do I do it. I have my newly installed SCSI drive conflicting w/ my network drive. I need to assign my burner and reader to different letters. This is the run down as of now:
A: -FLoppy
C: -SCSI BOOT
D: -50x CD
E: -Really slow burner
F: -Network and the new SCSI
G:-Network
H:-Network
I:-Network
J:-Network
K:-Network
What types of drives are they? If they are IDE drives go into device manager and change the drive reservation to a different letter.
------------------
Death is lighter than a feather - duty heavier than a mountian.
The CD drives are IDE, each are masters on Primary and secondary controllers. The SCSI drives are on a Adaptec 2940AU Host Adapter. All the others are Network.
in windows 2000 you can change the drive letter to anything you want (or even make it a folder on another drive)
this is done by:
r-click my computer
select manage
go to disk management
r-click the partition (right side), and select change drive letter and path.
its pretty self explainitory after that.
um - that is for - uh like windows 9x...Quote:
<font face="Verdana, Arial" size="2">Originally posted by cyberhh:
What types of drives are they? If they are IDE drives go into device manager and change the drive reservation to a different letter.
</font>
techs dont let techs give bad advice
Spot on Kannibul.Quote:
<font face="Verdana, Arial" size="2">Originally posted by kannibul:
in windows 2000 you can change the drive letter to anything you want (or even make it a folder on another drive)
this is done by:
r-click my computer
select manage
go to disk management
r-click the partition (right side), and select change drive letter and path.
its pretty self explainitory after that.</font>
------------------
Darren Wilson
Webmaster
The Carpers Lodge.net
The Webs Number One Resource for Today's Carp Angler.
https://forums.windrivers.com/ FLAMERS https://forums.windrivers.com/
All is well now. I found the Disk Management program in the system32 folder.
But u can't assign the primary partition drive letter right?
------------------
Hi
I fixed the problem. I used the Disk mangement utility to enable the use of my seconadry drive.
you can change any partition drive letter, except the system partitionQuote:
<font face="Verdana, Arial" size="2">Originally posted by Sun Zi:
But u can't assign the primary partition drive letter right?
</font>