Printable View
Was dropped off bed customer stated. The base that supports the hinges broke off there plastic stand pegs. Monitor looks ok
Harddrive is smooth running with usb2. Mother board had what looked like small fuse and another I could not find which looked like some kind of resistor torn off board you can see where they were attached at solder spot.
:confused: Where? ;)
Right in area of power cord plugs in and battery input/output. Multi layer boards but where they were was part of circuit connection for above points. I repaired hinges by drilling through plastic base and used there threaded stud to place in hole for flush surface. tightened screws and loosened cap nut a little to allow for easier movement. Just messing around mother board is probably too much anyway`s.Quote:
Originally Posted by SpywareDr
:confused: I'm afraid I still cannot "see" anything, nor do I understand most of what you are saying. What specifically do you need help with?
XP - just look for that model in a parts ad.
Then look for 'disassembly' instructions for it.
Only if I took a picture to give you a good look:) I thought maybe some one had a lead on a mother board cheap,Satellite LL675D-S7040Quote:
Originally Posted by SpywareDr
I already had it apart with mother board in my hand with ground strap. After taking apart a few laptops they are pretty simple. I cut off a piece of cardboard to label all of those screws, just push them in and edit where they go.Quote:
Originally Posted by CCT
How about here:
http://www.rakuten.com/prod/toshiba-...FQpefgoda0EAtQ
EBay has the most results - best price is about $185; input with just the one 'L' L675D-S7040.