car stereo deck that fits in 5.25 bay

Hello
I have some AT cases that have viable power supplies. I would like to know if there are available any car stereo decks that will fit into one or two of the 5.25 inch bays so I can convert one of the cases to a radio. Would make a slick flea market project.
Thanks
Ken

don't have an answer, but that's an interesting idea for sure. Hope it works out.

I believe that the standard car stereo deck is much wider than a 5.25" bay on a case...I will double check my car deck width. I will also measure the height, I have a single DIN size deck...you may be only able to fit this size and not the 1.5 DIN and double DIN sizes. Lastly, you may have to make adapter plates for a nice clean tight fit. Cool idea....could be considered a "Case Mod"... :D :D

Some of the GM cars (with Delco stereo's) might be at 5.25, but they are taller than a standard deck. I don't know for sure the measurments. If you call a GM dealer parts department, find any of the Pontiac's from the early to mid ‘90’s, such as a Grand Am, or GP, and ask them to measure the unit. I think the same stereo was used in many of the Chevy and GMC trucks around that time. They should have at least one handy. Word to the wise, when you want to buy them, go to the salvage yards. A brand new factory deck can run over $700 brand new.

Curiously I ask, how are you going to solve the power conversion from 120V AC to 12V DC?

[quote]Originally posted by Ya_know:
<strong>
Curiously I ask, how are you going to solve the power conversion from 120V AC to 12V DC?</strong><hr></blockquote>

Uh, the AT PC power supply puts out +12VDC + +5VDC to the drives and the MB

the cool part it you could mount the amp where the motherboard would normaly be. I guess the only thing left is where to put the audio connectors.

EDIT:
I just thought of another interesting mod that would fit this: with a little cutting, build a subwoofer into the case. :cool:

[quote]Originally posted by Fierce1:
<strong>Cool idea....could be considered a "Case Mod"... :D :D </strong><hr></blockquote>

Definately a cool idea. All sorts of light bulbs flashed over my head as I read this thread (that rhymed.) I have a car stereo here (Pioneer DEN-415) that I would like to do this with. It looks to be about 1 1/2" wider, and about 1/2" higher, that the bay. But some cutting and so forth could fix that. I'm just wondering how to go about hooking up power and speakers.

[quote]Originally posted by Rellik:
<strong>

Uh, the AT PC power supply puts out +12VDC + +5VDC to the drives and the MB

</strong><hr></blockquote>

So what you are saying is that I should have known that? Well call me stupid, I didn't_know that.

I am going to hook a hard drive up to my car now, I could use the extra storage... :D :D :D

The two black are grounds...the Red is 12 volt(i think) the yellow is 5.....And if your really super slick you make a 7 volt by using the 5 volt as ground...nice trick for quieting down big 120mm fans :D

Interesting idea. When you get started, be sure and post pictures for everyone.

That would be cool. I had always kind of wondered if anyone would ever think of selling an AM/FM/cassette player that could be installed in a PC. I know I would like it. :)

I suppose there wouldn't be enough demand, but couldn't they make one that *could* work, but also be able to install into a car without a whole lot of fuss?

Just thinking out loud.... :D

[quote]Originally posted by LagMonster:
<strong>the Red is 12 volt(i think) the yellow is 5 </strong><hr></blockquote>

Nope, the other way 'round.


[quote]Originally posted by LagMonster:
<strong>And if your really super slick you make a 7 volt by using the 5 volt as ground...nice trick for quieting down big 120mm fans
</strong><hr></blockquote>

Yes, neat, as long as the fan will start reliably at 7 volt, some may not.

We built a system with a AM/FM tuner into a case- is desinged for use ina drive bay-- was an item a customer brought in for us to put into his new system-- pretty slick- no tape deck though. :)

[quote]Originally posted by Ya_know:
<strong>

So what you are saying is that I should have known that? Well call me stupid, I didn't_know that.

I am going to hook a hard drive up to my car now, I could use the extra storage... :D :D :D </strong><hr></blockquote>

Sorry, didn't mean to sound insulting :o , I guess I have been keeping my head in my PC case for a little too long :D

Oh, and I took my brothers car subwoofer (which he isn't using now) and used an AT power supply to power it, only problem a there is a little bit of AC hum.

Rellik, please disregard this if you already know it, but since the AT supply is a high frequency switching regulated supply, the mains hum is probably not from the supply. Most likely it is due to the earthing of the audio signal connections. Hum is usually due to a common earth path, often called a hum loop. The earth side of the input signal leads should only be connected to the chassis at one place, usually the case of the amp. If it goes to earth potential anywhere else a loop will be formed which can induce hum from magnetic fields. It can be hard to avoid hum loops with car amps, which aren't designed for mains operation, but some adjustment to the earthing might eliminate the hum you're getting.

[quote]Originally posted by Platypus:
<strong>Rellik, please disregard this if you already know it, but since the AT supply is a high frequency switching regulated supply, the mains hum is probably not from the supply. Most likely it is due to the earthing of the audio signal connections. Hum is usually due to a common earth path, often called a hum loop. The earth side of the input signal leads should only be connected to the chassis at one place, usually the case of the amp. If it goes to earth potential anywhere else a loop will be formed which can induce hum from magnetic fields. It can be hard to avoid hum loops with car amps, which aren't designed for mains operation, but some adjustment to the earthing might eliminate the hum you're getting.</strong><hr></blockquote>

That's good information to know, I kinda halfway knew that, but in this case I doubt I will be able to eliminatethe hum completly unless I filter it somehow.

When my brother had the sub hooked up to his system, he was using a regular 12V converter, which I guess wasn't as good as this AT power supply, IRC the hum was worse with the other power supply.

Yellow is 12VDC
Red is 5VDC

i've already made a few mods myself, found out the hard way that red is NOT 12 volts.

there is a stereo amp by Kama bay called Scythe SDAR-2100 Kama Bay AMP 2000 (Rev.B) 5.25 Bay AMP found it on ebay works great