OcZ SSD really slow Need Help

I just rebuild my rig ans i'm getting normal slow speed with my 64gb ssd. Here's my specs below.

HDD: OCZ CORE 2.5" 64GB MLC SATA-II SSD, OCZSSD2-1C64G

Windows: Microsoft Windows 7 6.1.7600
Internet Explorer: 8.0.7600.16385
Memory (RAM): 3582 MB
CPU Info: AMD Phenom(tm) II X4 955 Processor
CPU Speed: 3286.1 MHz
Sound card: Speakers (High Definition Audio
Display Adapters: ATI Radeon HD 4290 | ATI Radeon HD 4290 | RDPDD Chained DD | RDP Encoder Mirror Driver | RDP Reflector Display Driver (This Video Card is a Temp Until Iget a Ati 5670 1gb)
Monitors: 1
Screen Resolution: 1680 X 1050 - 32 bit
Network: Network Present
Network Adapters: Realtek PCIe GBE Family Controller
CD / DVD Drives: F: TSSTcorpCDDVDW SH-S243N | G: HL-DT-STBD-RE WH08LS20
COM Ports: COM1
LPT Ports: NOT Present
Mouse: 12 Button Wheel Mouse Present
Hard Disks: C: 56.3GB | D: 931.5GB | E: 465.8GB
Hard Disks - Free: C: 24.9GB | D: 929.5GB | E: 103.0GB
USB Controllers: 7 host controllers.
Firewire (1394): 1 host controllers.
PCMCIA (Laptops): Not Installed
Manufacturer: Award Software International, Inc.
Product Make: GA-890GPA-UD3H
AC Power Status: OnLine
BIOS Info:
Time Zone: Eastern Standard Time
Battery: No Battery
Motherboard: Gigabyte Technology Co., Ltd. GA-890GPA-UD3H
Modem: Not detected

Unfortunately, you have not provided enough information to troubleshoot this problem.
could you go into more detail regarding the problem?

How do you define "slow"? - Does it take 5 minutes to boot? or does it take 30 seconds when you are expecting 15? Is it slow based on benchmarks from other people with the same hard drive?

What chipset drivers are you using?
How did you partition the hard drive?
Did you Securewipe the hard drive before installing? (if this is a re-install)
Did you flash to the latest firmware on the SSD?

Installed on Sata Port Not Gsata install os reboot started in 27sec after I install everything boots after 1min.
I didn't install no partition was told it was preformated ready for os.
Can't find a update for this model.

I even followed the guide on OCZtech still nothing.

http://www.ocztechnologyforum.com/fo...ad.php?t=64753


Don't see my model:

http://www.ocztechnology.com/ssd_tools/

See benchmark below.

I'm starting to think I didn't install the os right. MaybeI should of formated the ssd even if the package said preformated. What is a partition alignment? Do you think it's best to just Backup my system and formated the ssd or just do a clean install???? What's the steps needed before installing a os on a gen1 ssd?

By the way I can't find any updates or flash for this ssd in case you ask.

Heres a picture of my partition alignment offset Does it need alignment? If so I thought windows 7 does that automatically.

I see that you started a thread over at the OCZ forums. The experts are there and i think you should continue to follow your support there. I'm just an amateur compared to them. I would just be repeating things that you've already been told in that thread.

I just wanted more insight on the problem. Allot of times if one forum doesn't help another will. oh well thanks.

Quote:

---

Originally Posted by spawn1980

I just wanted more insight on the problem. Allot of times if one forum doesn't help another will. oh well thanks.

---

I would agree, but i gleaned all my SSD knowledge from there, so i have the utmost confidence in their ability to solve problems.

Thanks again

Hey "Matridom"
Can you tell me if this speed looks ok with you. I had todelete the volume and realign the Drive.