Search:

No Ive tried these drives by themselves with only 1 drive ,active terminator and adaptec card no luck.

Thanks for the feedback Herman Kamphorst

emr is correct D-link will default on firmware upgrade make sure your wan settings match for your ISP (username? password? DNS ? static Ip assigned by ISP ?)
also were you cloning your MAC address...

Enjoy Your Time Off I toke my first 3 week vacation last year Toke my family to Disney
FLa wish i could have taken 3 more weeks off My work week is anywheres from 45-60 hrs the last month 60+ per...

Check yor Page File Size 2000 server and XP tends to have some weird problems with a default page file size I usually set the size between 5 and 10% of the drive size.
Also dont forget each...

anyone online worked with IBM Ultrastar SCSI Drives DPSS-309170

9.1 Gb 7200 rpm ultra160 LVD/SE .

I have 2 of these drives cant seem to get them to run with my Adaptec Cards
Ive tried forcing...

I agree with Platypus
once the nail varnish is dry Shouldnt affact the drive at all ;unless it has sparkles in it the sparkles are usually metal flake try washing off with acetone and blowing off...

I take the Linksys is your Router? are you useing DHCP from the router?

Herman K

Mallik

I've been doing brd level repair for 18 years on camcorders, home and car Audio finding out the values of the damaged parts will be your greatest challenge the part marked c5 is a capacitor...

Fallguy

Pick up a D-Link Print Server it will do Netbuei, ipx/spx ,and tcp/ip
I have 3 of these running currently on a NT4 network works great
Its config utility attaches to the device initially...

Try Imail by Ipswitch very easy to setup and quite cheap The standard version gives you 5 domains and unlimited users. you can import NT user accounts directly to form the email addresses it can do...

Hey janice

Sorry for the delay in response ,Not sure what to tell you from Here other than download the other versions that were listed the MB revision is what I sent You because no VB rev was...

Sounds like the person in tech support should be in another dept. since the drivers I sent were listed for only win 2k.Unless your laptop has many revisions under the same Model No.Not sure right...

Sent all DRivers for CF-37mb there was no VB listed Via email

Herman Kamphorst

The drivers are listing an MB or LB or ND after the CF-37

which is yours?

I'm on the Tough book website there is many updates and drivers checked roughly 3 sets of 30 items from bios to modems and sound Etc.

are you able to download and burn to a cd the drivers you...

looks like win2k does not recognise the chipsets and are setting its most generic as detected.

are there any other make or model Nos or type no.? How old is the laptop?
is there an FCC No located...

Do You Have a driver CD that came with your laptop? you said laptop originally had w2k.
Just checked driver page Panasonics Link does not list Laptops is this an older model or are you overseas...

Tommo666

Man you just made My day was having a pretty crappy one at that
thanks for the info was exactly what i was looking for.

Thanks again

Herman kamphorst

Stop screen could be due to Xp Recovery not seeing chipset properly same thing will occur if an XP hardrive is taken from one MB to Another.I had found a workaround for this But the change has to be...

Did you Get Drivers with the viewsonic Monitor ?
I had an older 17" viewsonic and would not fill the screen fully until
the viewsonic driver was installed .

Hope this helps

Herman Kamphorst

Looking for any info on Mylex Raid Card DAC960P.Purchased two of these cards on EBAY to put together a Disk Array for home I have a bunch of Different SCSI Harddrives Some SCSI 3 Some Wide-Ultra2 all...

This Maybe a redundant question But here it goes What version of Netware ?
Typically earlier versions ran primarily on ipx/spx is your novell login script possibly not allowing dhcp ie:static Ip...

What brand of modem?

is it considered a winmodem that uses an enumerator program/driver?

I've had similar problems installing HCF modems if you manually select the driver forget it it will list...

Sicilian

try powering the harddrive seperately from the rest of the computer say with an AT power supply if the drive has partially seized bearings it will cause the current limiting circuit of an...

Hi Geoscomp

I thought about that as well already checked with dell nothing in cmos stoppnig me from installing drive.

I've also installed into the same laptop a 4.8g works fine 3.2g and a 1 gig...