Search:
Type: Posts; User: hezyone
Search:
Search took 0.00 seconds.
-
February 5th, 2014, 06:39 PM
I am running windows 7. I have Internet Explorer 11. Explorer takes five minutes to load. Chrome loads right up. I have tried resetting settings. How do I fix my problem?:confused:
-
January 18th, 2011, 01:06 PM
-
January 17th, 2011, 10:27 AM
every few minutes I get the following message Windows has stopped this device because it has reported problems. (Code 43) It shows up in control panel as standard usb controller. I am running an...
-
December 3rd, 2009, 03:14 PM
I understand the limitations of sattelite internet. This problem is new. I have have been with Starband for 5 or 6 years. This has just started within the last month.
-
December 3rd, 2009, 08:39 AM
Sorry CT. That didn't help any. I understand FAP. I am getting good download speeds (testmy.net). But my internet proformance is poor. I am trying to figure out why.
-
December 2nd, 2009, 09:31 AM
I use Starband sattelite internet. My preformance is not what it should be. If I check my download speed on testmy.com, I am getting a good strong signal. How is download speed measured? Is it...
-
November 8th, 2009, 08:33 PM
Board: Acer EM61SM/EM61PM
Bus Clock: 201 megahertz
BIOS: Phoenix Technologies, LTD R01-B1 12/29/2006
Bios & winflash came from Biosagent Plus.
-
November 7th, 2009, 07:46 PM
When I try to flash bios with winflash, I get the error message "Failed to get data for ID"
-
January 10th, 2009, 04:19 PM
Checkout link
http://biosagentplus.com/results.php?ref=02xzqrr&referral=40&PHPSESSID=k0jsobacdfcufvf227gt7tah50
-
January 10th, 2009, 03:27 PM
I tried each stick alone. They all work. Biosagent says Bios is bad, needs download.
BIOS ID: 12/29/2006-MCP61M-AM-6A61KE11C-00-None
BIOS OEM: This BIOS is exclusively for Acer only (R01-B1) -...
-
January 8th, 2009, 01:26 PM
Have been bogged down here at work. I will try swapping 1g sticks as soon as I can, then try flashing the BIOS. I appeciate the help.
-
January 6th, 2009, 09:09 AM
I put 1g-512ms-1g-512ms. Computer will start but I am only running single channel. I put two 1g in the yellow slots, now I am running dual channel. I downloaded the flash bios that OMGmissinglink...
-
January 4th, 2009, 07:03 PM
When I say a bank, I mean two slots of the same color. If I put the 1gs in the blue slots & the 512ms in the yellow slots computer does not start. All of the 1gs are the same make size & speed.
-
January 3rd, 2009, 10:48 PM
Put the two 1gs in the first bank, the two 512ms in the second bank. Computer does not start.
-
January 1st, 2009, 06:55 PM
1. I put the two 512 mg in the first bank-no error message.
2. I put the two 1g in the first bank-no error message.
3. I put the two 1g in the second bank-no error message.
4. I put the four 1g...
-
January 1st, 2009, 02:55 PM
If I put the two remaining 1 gig sticks in the second bank, I get the error message again. I can see no difference in speed going from 1 gig to 2 gig to 4 gig. So my thoughts are either the second...
-
December 25th, 2008, 08:18 PM
I may be getting somewhere now. I put the two original 512mg sticks in first bank-no error message. I removed & replaced with two of the 1gb sticks in the first bank-no error message.
-
December 25th, 2008, 10:35 AM
I removed two 512mb sticks.
They are ProMos Technologies ddr2-667mhz, part# PC2-5300U-555-12-D0.
I replaced with four 1gb sticks.
They are PNY ddr2, part#PC2-5300 667mhz Optima Dual Channel
-
December 24th, 2008, 01:45 PM
No It still is not resolved. I still get the same error message.
-
December 24th, 2008, 10:02 AM
------------------------
CPU-Z version 1.49
-------------------------
Processors Map
------------------------------------------------------------------------------------
Number of...
-
December 23rd, 2008, 08:25 PM
File is too large
File is over 50,000, I cn only post 10000.
-
December 23rd, 2008, 01:40 PM
I have no bulging or leaking capacitors.
-
December 12th, 2008, 10:25 PM
It goes into a surge protecter.
-
December 11th, 2008, 09:42 PM
It is not the last option screen, but yes.
-
December 8th, 2008, 05:27 PM
I have already tried setting bios to default settings. Does not help.
|
|