Search:
Type: Posts; User: Silverman
Search:
Search took 0.01 seconds; generated 32 minute(s) ago.
-
January 12th, 2006, 12:15 PM
To monohouse, the a7v333 does not support dual channel mode therefore will only work with the standard data path.
-
August 23rd, 2005, 11:20 PM
Thanks Ruslan, it's the HP Alcatraz version of the Asus P4T Rambus board.
-
August 23rd, 2005, 09:55 AM
Thanks for the link Ruslan, the manual downloaded from the websight shows the location of the USB Pins on the board but not the pinout. The pinout is needed as the board is now a transplant in a non...
-
August 21st, 2005, 07:02 PM
Does anyone have the USB-HPD pinout for the chassis mount usb ports, it is 10 pin but not standard as it is HP Alcatraz version.
TIA
-
July 22nd, 2005, 01:46 AM
I don't know if this helps now but I think the VIA drivers won't work on hybrid AMD751/VIA chipset motherboards, The AMD chipset drivers have to be used which will have the proper VIA controller and...
-
Two front audio spec's were introduced at around the same time, one I know of was an Intel Spec the other ?
-
I agree with Ruslan: TwinMos memory and Nforce2 work well if they are matched pairs (Dual Channel Kit AKATwister) All it takes is for one stick to be off in timings to throw the whole thing in the...
-
March 29th, 2004, 10:55 AM
433 MHz (6.5 x 67)The multiplier is locked on Intel CPU's so your CPU speed is correct at the posted settings.
As far as the Ram count goes if you have already enabled fast boot than there isn't...
-
March 29th, 2004, 12:38 AM
Since the BIOS was updated I am assuming that the cmos was cleared to defaults. Disable the logo so all the stuff that used to appear will appear once again, it may be identified as quiet boot as...
-
March 26th, 2004, 01:10 AM
Prescott Temps can get near the water boiling point which I guess is normal.
What affect this will have on the mainboards over time is anyones guess. I read an article on some other websight that...
-
March 25th, 2004, 01:45 AM
From every article I have read about Prescott CPU's 52c with a heavy load was about high/average with standard heatsink/fan combo. Whats the cpu temp at Idle?
-
December 8th, 2003, 01:52 AM
Your problems might go away if you disable the onboard audio for your motherboard, that includes the MPU401 midi controller that is also onboard.
-
November 30th, 2003, 12:31 AM
Since the K7S5a uses a SiS chipset the VIA drivers will be useless.
-
November 25th, 2003, 10:15 PM
If the P4S is running well for you that is a good thing. I ended up sending 1 P4P800 deluxe back myself and getting a new version2 due to some problems at post/startup that was later resolved in a...
-
November 24th, 2003, 11:26 PM
The P4S800 board is a step backward in performance compared to the P4C and P4P800 boards IMO. What issues did you have with the Canterwood and Springdale boards if you don't mind me asking?
-
November 11th, 2003, 11:17 PM
My DFI P4 board also did this and when I asked a DFI rep about it he told me it was normal. This allows users with USB keyboards and mouses (mice) to use the power on by keyboard/mouse option. Made...
-
November 11th, 2003, 11:08 PM
The last one I put together a few months ago only supported upto 2700 memory and the bios also gave the option up to DDR 400. Perhaps an O.C. option?
-
November 10th, 2003, 01:11 AM
could it be a pcchips board? perhaps an M769VMRT derivative. Check here http://www.stud.fernuni-hagen.de/q3998142/pcchips/
-
November 6th, 2003, 12:33 AM
I had a similar problem with a six channel cmi8738 but with a DFI AD75 board and XP Pro. I let XP search for the drivers on the internet and after about 30 seconds the card installed and all was good...
-
November 6th, 2003, 12:11 AM
Well, after about 20 minutes on the phone with an ASUS rep I finally got Dual Channel DDR working properly and the bios POST screen displays it properly.
In the event anyone else needs the info you...
-
November 5th, 2003, 12:04 PM
Here's what ASUS has to say:
To tell which mode the memory controller hub is working on, simple press the TAB key to skip the full-screen boot logo while booting the system up. The POST screen as...
-
November 5th, 2003, 11:45 AM
Splash screen is turned off at this point to see the POST results. Pause /Break key will halt the progression so as to view the text as it boots:
AMIBIOS (C)2003 American Megatrends, Inc.
ASUS...
-
November 5th, 2003, 02:21 AM
I just got a P4P800 Deluxe revision2 motherboard along with 2.4 ghz 800 FSB P4 with 1024 Ram (4 sticks of matching Kingston DDR400 Samsung branded memory Certified by Asus to work in Dual Channel)...
-
October 24th, 2003, 11:37 PM
SL-85DRV (VIA P4X266 PR22-S) perhaps this board is a -S manufactured by Soltek for VIA to protect the innocent from being sued in court by Intel (remember that whole Intel/VIA :guns: debacle a...
-
October 3rd, 2003, 12:04 AM
Thanks for the reply, I just ran a 40 loop Sandra burn in without a single problem so you are right, the cpu isn't the problem.
|
|