e139761 pin settings

[sgtdraco]

OK i just fitted a gatway motherboard and its running fine, if this is the board your looking for the pin outs on then i have listed all numbers on the pcb/motherboard so you can make sure its the right one.

All these nubers can be found on the pcb/motherboard.

E139761 - Next to the ide ports bottom end.

4000622 - Next to the ide ports bottom end on a sticker with bar code.

N232 - Next to the floppy drive port bottom end.

IMEA02400315 AA A19243-204 - Below front panel pin bottom on a sticker with bar code.

Remember that pin one on all jumpers is maked with a small white triangle.

The front panel pin block for this pcb/motherboard is a 16 pin block at the front side under the floppy drive port.

Front panel pin settings:

HD Led - 1,3
Power Led - 2,4
Reset - 5,7
Power On - 6,8
IR - 11,13,15

Hope this helps.

[convertisseurfou]

hello,
is about the old motherboard E139761_Gateway ?
http://support.gateway.com/s/MOTHERB...M0026422.shtml
the diagram of the connector is erroneous, I created this bond where you will find an drawing with a correct diagram :
http://pageperso.aol.fr/Convertisseu...onnections.jpg

in a friendly way