|
-
January 13th, 2005, 01:08 AM
#1
Registered User
You can try the new CPU in the old board, to see if it is indeed good/bad. Could be that you got a bad one (it happens) new right out of the box. If it boots then I’d look at one of the other items, going about it the same manner, (power supply, cd-rom, 1.44, and so on).
Be careful, don’t put it all on at one time. New to old and back do not use your old chip in the new board!!!!
I run the D865GBF motherboard, and an Intel Pentium 4, 3.0E GHz 800 MHz FSB, 1MB L2 Cache, Hyper Threading Technology CPU, I did have a bad board the first time it went together, but mine was a bad pot, which could be seen on the board.
"More Than Merely Names"
"NEVER FORGOTTEN"
-
January 13th, 2005, 01:16 PM
#2
It could also be something as simple as improperly connecting the power button to the motherboard, not connecting the fan to the CPU_FAN connector.
Similar Threads
-
By Marco Ha in forum Hard Drive/IDE/SCSI Drivers
Replies: 5
Last Post: August 25th, 2004, 10:21 AM
-
By Gollo in forum Tech-To-Tech
Replies: 4
Last Post: April 13th, 2004, 07:49 AM
-
By riddellcomp in forum Tech-To-Tech
Replies: 3
Last Post: January 25th, 2004, 10:03 PM
-
By SirXcalibur in forum Tech-To-Tech
Replies: 3
Last Post: January 9th, 2002, 01:37 PM
-
By Jake_Nuke in forum Tech-To-Tech
Replies: 9
Last Post: May 21st, 2001, 08:13 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Reply With Quote
Bookmarks