[quote]Originally posted by Cody:
hsf?
HSF = Heatsink & Fan.
Take it from me that it is the Hardware Monitor in the BIOS warning that either a Fan is not spinning correctly (or attached to the onboard power connector & not contacting the RPM monitor pin) or the temperature alarm (or Chassis open) setting is set too low.
I have used these boards in the past & seen this.
If it was RAM Danimal, then the board wouldn't post (as it seems it is from the original post by Cody). RAM faults are generally always on Award BIOS a single beep repeated, not a warbled sounding beep (as described)like the Hardware monitor.
Bookmarks