Opinion Needed
Results 1 to 7 of 7

Thread: Opinion Needed

  1. #1
    Registered User
    Join Date
    Aug 1999
    Location
    near the backdoor to hell
    Posts
    804

    Post Opinion Needed

    I am thinking of (and have start) purchasing the parts to build myself a dual processor system.

    I have looked over a lot of parts, basicly this is what i have come up with...

    dual Intel PIII-667Mhz
    MSI MS-6321
    4x256MB Micron PC133 ECC (non-registered)
    Adaptec AAA-131U2 (ultra SCSI2 Raid controller)
    CoolerMaster DP5-5G11 CPU Fan
    3x 9.1gb IBM Ultrastar DCHS-09Y (will be in raid 5)
    ATI Rage IIc (this will be a server - i may put something better in it if i decide to have this machine replace my GHz tbird)

    will this make a good server?

    i was thinking of using a tyan thunder LE (s2510) but it is too costly.

    let me know what you think.

    ps - any recommendations for a case? (a true server case - not just a full tower)

  2. #2
    dlagace
    Guest

    Post

    with all the money your spending check out www.clear-viewtech.com for a case.

    ------------------
    IF IN DOUBT FDISK /MBR especially with
    Windows (CTRL ALT DEL) 98

  3. #3
    Registered User
    Join Date
    Aug 1999
    Location
    near the backdoor to hell
    Posts
    804

    Post

    thanks - i checked it out, not quite what i had in mind...
    i am also looking to put the drives in a mobile rack (so i can hot plug and watch the pretty lights...)

  4. #4
    Registered User
    Join Date
    Aug 1999
    Location
    near the backdoor to hell
    Posts
    804

    Post

    case chosen:


    http://www.casedge.com/html/work_group_server.html

    i also got the hot-swap drive cage...

    this is going to be one cool home system....


    [This message has been edited by kannibul (edited February 19, 2001).]

  5. #5
    Registered User
    Join Date
    Nov 1999
    Location
    Pleasant Valley, NY, USA
    Posts
    449

    Post

    <font face="Verdana, Arial" size="2">Originally posted by kannibul:
    case chosen:


    http://www.casedge.com/html/work_group_server.html

    i also got the hot-swap drive cage...

    this is going to be one cool home system....


    [This message has been edited by kannibul (edited February 19, 2001).]
    </font>
    Ooh...I like it. How much did you end up paying for it and where?



    ------------------
    Bryan Pizzuti
    CompTIA A+, CNAP
    [email protected]
    ICQ # 8525092
    Yahoo Messenger: npaladin_2000
    Bryan Pizzuti
    CompTIA A+, CNAP
    [email protected]
    ICQ # 8525092
    Yahoo Messenger: npaladin_2000

  6. #6
    Registered User
    Join Date
    Aug 2000
    Location
    Largo, Fl USA
    Posts
    197

    Post

    Go with Rack Mount for server and DFI for MB.
    I have several systems running WinNT Servers and Win 2000 Pro Server on Rack Mounted systems and they run cooler than cases.dual prosessors Intel or AMD with Super cooler Fans dual Video outputs two NIC Cards...

    ------------------
    Computer Shop Owner A+ COMPTIA Master Tech
    Computer Shop Owner A+ COMPTIA
    Tampa Bay Communications Inc
    http://www.smokinparts.com/smokinpartslogo

  7. #7
    Registered User
    Join Date
    Aug 1999
    Location
    near the backdoor to hell
    Posts
    804

    Post

    $363 from mwave (off of pricewatch)
    that includeds a power supply and the cage...

    rack mount woudnt work for me as i have no rack to put it in (it is a convertable anyway)

    like i's was be say'in - this be one cool home system....

    i would LOVE to get that tyan board....
    that would ROCK (but would break the bank...)

    [This message has been edited by kannibul (edited February 19, 2001).]

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •