-
January 9th, 2000, 01:54 PM
#1
CD-ROM can't read cd's!
i have a samsung 32x cd-rom scr-3231 that will only occasionly read a cd-rom, it doesn't seem to be able to detect the cd in the drive
anyone got any ideas? (the company i brought it from has gone bankrupt so i can't exchange it)
-
January 9th, 2000, 02:12 PM
#2
just looked at my post and decided it looked a bit empty! heres some more info...
the computer and cd-rom are now a year old about 1 month ago the cd-rom started to not read cd's, but would work if you re-booted. now it doesn't work at all. i have added a new cd-rom which works fine
here is how the ide is set up...
ide primary:
master - hard disk
slave - new cd-rom
ide secondary:
master - hard disk
slave - old cd-rom
-
January 9th, 2000, 08:27 PM
#3
CD-ROMS don't last very long. They seem to be one of things most often to go bad. It seem that smoke and dust will kill and cd-rom player in about a years time. Just try to buy a good used cd-rom player. They are hard to find.
-
January 11th, 2000, 03:44 PM
#4
I seem to go through a CD ROM in about 3 - 4 Months !!!
feel free to comment on my website. <a href="http://www.bytes-back.co.uk" target="_blank">http://www.bytesback.fsbusiness.co.uk</a>
-
January 28th, 2000, 05:22 AM
#5
Allthough this is not a cure for your drive problem if you must replace it, while your in there Install Both Hard drive on IDE channel#1 and both CDs on Channel #2. This improves performance on some/most system
Originally posted by BAD.IRON:
CD-ROMS don't last very long. They seem to be one of things most often to go bad. It seem that smoke and dust will kill and cd-rom player in about a years time. Just try to buy a good used cd-rom player. They are hard to find.
-
January 28th, 2000, 09:20 PM
#6
Originally posted by SRXtreme:
Allthough this is not a cure for your drive problem if you must replace it, while your in there Install Both Hard drive on IDE channel#1 and both CDs on Channel #2. This improves performance on some/most system
Actually, this actually slows down most systems as the both hard drives are located on the same IDE channel. As far as the CD issues, I have to agree with the consensus that the CD drive may be wearing out. Luckily, they're pretty cheap nowadays, which, combined with the higher speeds, accounts for the much shorter lifespan.
For troubleshooting purposes, make sure the CD drive is recognized by the BIOS and Windows and check the properties (right click My Computer|Properties|Device Manager|Cd-Rom.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks