-
January 18th, 2001, 11:36 AM
#1
[RESOLVED] overclock PIII 550 katmai
Does anyone know how 'hot' a PIII 550 Katmai should be running at? I have 1 PSU fan, 2 case fans and heatsink with fan on processsor which holds the chip at around 50 degrees C (sorry don't know the conversion) clocked to 600 (FSB@109).
The reason I ask is that I have just upgraded to PC133 ram and so have been thinking about switching the FSB up to 133. Any thoughts much appreciated.
Full spec:
PIII 550 @ 600 (109 fsb)
256 mb PC133
Abit BE6-II mboard
Creative GEforce 2 32mb ddr
-
January 19th, 2001, 04:31 AM
#2
my setup (550],130F.warning,140Fshutdown.
my 550 is a slot 1. usly runs between 86F-114F,depends on room temp and programs i run.
hope this helps.
-
January 19th, 2001, 05:38 AM
#3
Registered User
You should get about a 5 degrees difference.
55C should be the maximum temperature, assuming everything else works fine!
------------------
"Matter is passive. In spite of its power, it can't be controlled without the human mind." Sokrates
My Hardware Info, Hardware Media and Computer History page
The wandering Odysseus of the web.
-
January 19th, 2001, 05:43 AM
#4
Excellent, cheers for those. I'll test it hopefully this weekend and let you know what happens.
-
January 19th, 2001, 06:58 PM
#5
-
January 20th, 2001, 07:16 PM
#6
>>The reason I ask is that I have just upgraded to PC133 ram and so have been thinking about switching the FSB up to 133. <<
I doubt the katmai core is going to make it to 733...but good luck anyway...!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks