-
August 28th, 2001, 10:09 AM
#1
tualitin p3 1266 mhz
i am using a asus cusl2 mobo with a p3 1ghz and i was wondering if i can put the new p3 1266 mhz tualitin cpu in .if it is possible will the speed gain be worth the while?
-
August 28th, 2001, 03:50 PM
#2
Registered User
if you give me about a week - I'll let ya know how a 1.26ghz at 512k will do. I'm going to be getting a p3tdde (supermicro) and one chip to start off.
Message me in a few days and I'll let ya know, I'm running a single 1ghz right now
-
August 31st, 2001, 03:17 PM
#3
Registered User
i don't think the CUSL2 will support cpus made with the .13 micron process, i think you'll need a new board. Anandtech did a review of the new cpus <a href="http://anandtech.com/showdoc.html?i=1509" target="_blank">here.</a> check it out
take care and tempt not the fates
-
September 3rd, 2001, 03:08 PM
#4
Registered User
To use the newer P3's, you will need the Asus TUSL2-C. This board will support all current versions of the P3.
My brain went into standby mode and I can't get it to wake up, is there a BIOS patch for this?
-
September 5th, 2001, 07:35 AM
#5
Registered User
I just ordered my p3 1.26 512k and the mobo for it. I'll post my marks on it here hopefully late friday
-
September 8th, 2001, 04:07 PM
#6
Well, if it wasn't for my freakin HD goin out on me, I'd have my stuff all set and ready to go - I'll try to post 'em here later on tonight
-
September 8th, 2001, 11:07 PM
#7
Dhrystone ALU - 3563 MIPS
Whetstone FPU - 1706 MFLOPS
p3 1.26ghz 512k - single cpu
------------------
Just because is shouldn't work, dont mean it won't.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks