|
-
March 17th, 2002, 06:23 AM
#1
Registered User
 Burning a blank cd-rw
I have a Yamaha CDRW8424E-VK burner running windows xp. I have Easy CD Creator 5. When ever I want to burn files into a cd it would start to burn. After 20min(4x) I go into my computer and the burner drive only to find that the cd would be empty. I even tried switching to diffrent brand cd's but nothing. I have tried to back up my files onto a cd for the past week but all the cd's come out empty. I even tried to use nero but it gave me some messages. I saved the log if anyone want's to read it.
Basicaly nero says
Burn process completed successfully at 4x (600 KB/).
But when it tries to verfy data,
7:06:58 AM #27 VERIFYERR 10 File UDFCompilationImpl.cpp, Line 5694
Cannot mount the written CD
"YAMAHA CRW8424E" (H:1, T:0)
7:06:59 AM #28 VERIFYERR 13 File UDFCompilationImpl.cpp, Line 5799
Status summary
Total files=0, identical=0, different=0, inaccessible=0, skipped=0.
7:06:59 AM #29 Phase 81 File dlgbrnst.cpp, Line 1438
Data verification failed
I don't know what happened, I don't beleve it was the upgrade to windows XP because I was able to burn at least one cd after upgrading.
Anyone got any ideas of how to fix this?
-================================-
-={[ Prince Abaddon of the United Angels Federation ]}=-
================================-
-
March 17th, 2002, 06:31 AM
#2
Driver Terrier
I have a whole bunch of perfectly good CD's that I burnt with nero on xp - that then say they are empty. Drives me nuts, however I get round it by reading them on my 9x box and pulling the files back across the network.
I gave up looking for answer to this one...
Never, ever approach a computer saying or even thinking "I will just do this quickly."
-
March 17th, 2002, 08:12 AM
#3
Registered User
Ok now I just found out that it won't read cds, I'm guessing it's dead. Now I think it was the firmware upgrade, is there any way of going back?
-================================-
-={[ Prince Abaddon of the United Angels Federation ]}=-
================================-
-
March 17th, 2002, 09:38 AM
#4
Registered User
If it stopped writing and then shortly after stopped reading then it sounds like its died to me. You could try using a CD-player cleaning disc but i've had limited success with these, sometimes they seem to make things worse, although in your case, this would be difficult to achieve. Buy a nice new Plextor and live happily ever after 
orange
Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning -+- Rich Cook
-
March 17th, 2002, 12:41 PM
#5
i will give you good advise. do use this cd creator . its sucksssssss.
the best is nero 5. i had so many problem with cd creator that only me knows.
when i to that yamaha cd rw i install nero 5.
problem's gone.
-
March 17th, 2002, 05:13 PM
#6
i had problems burning after doing a firmware upgrade on my aopen 20x10x40,so i just rflashed it with older firmware and it did ok after that,
clauded
-
March 18th, 2002, 11:46 AM
#7
Registered User
So can anyone find an older firmware for my drive?
I already killed 2 cd-roms over 2 years. T_T
-================================-
-={[ Prince Abaddon of the United Angels Federation ]}=-
================================-
-
March 18th, 2002, 04:45 PM
#8
Registered User
[quote]Originally posted by Prince Abaddon:
<strong>So can anyone find an older firmware for my drive?
I already killed 2 cd-roms over 2 years. T_T</strong><hr></blockquote>
Contact tech support from the company that manufactored the cd-rw. They should have one they'll email you.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Reply With Quote
Bookmarks