-
January 23rd, 2001, 11:15 AM
#1
with cd rom & cdrw, setup fails....
i'm puttin' the finishing touches on the system i built for me (finally), and am encountering an odd problem...
when i have just my burner installed on the secondary master (sony 8/4/32) no problems reading, burning, ripping, anything. when i add an additional cd rom drive (now it's a kenwood trueX 72) on the primary slave, i encounter problems with both drives... nothing at sony's site about it. i have been having similar problems with other cd roms, but thought they were garbage. it will play music cd's, but setup hangs on unreal tournament and deus ex on both drives... before i had similar problems where a pos cd rom drive would only read data cd's and my relatively new creative cdrw would only read music cd's (weird).
i will go back for the 6th time, and check all my cables, jumpers, etc.. to verify correct setup. have toggled between dma modes in bios with no success. post detects and properly id's the drives...
any help....
intel d815eea mobo
p3 800eb
128mb crucial pc133 CAS2
maxtor diamond max 40gb uata100 hdd
annihilator geforce 2mx
sb live! platinum 5.1
win 98se with all critical updates
on occasion, with the old cdrom and cdrw, i would get an msgsrv32 stopped responding error if it's any help..
thanx team!
------------------
"What does it all mean, Dr. Holmes?"
"Ahh, I can not tell. I have no data."
[This message has been edited by willieray (edited January 23, 2001).]
"What does it all mean, Dr. Holmes?"
"Ahh, I can not tell. I have no data."
"Psssst...hey you...don't tell anyone i told you, but
-l ds:0100 2 1 12 gets you FAT."
-
January 23rd, 2001, 02:29 PM
#2
-
January 24th, 2001, 11:05 AM
#3
Another option is to run the cd and cdrw on seperate ide channels.
-
January 24th, 2001, 03:54 PM
#4
hello willieray! i had this prob. 2 or 3 mo. ago but diff. m/b. had to update ide controlers.[ bus master].just a suggestion. best of luck,im sure you will get it to rocking! let me know what you find .
-
January 25th, 2001, 10:00 AM
#5
thanx team!
it's up and running without a snag!
flashed the bios and, even though i just got the board, there was an updated driver for the ultra ata 100 controller. should've checked these things first, but it slipped my mind. was convinced i had a strange irq conflict somewhere... oh well, you RElearn something everyday!
thanx again!
------------------
"What does it all mean, Dr. Holmes?"
"Ahh, I can not tell. I have no data."
"What does it all mean, Dr. Holmes?"
"Ahh, I can not tell. I have no data."
"Psssst...hey you...don't tell anyone i told you, but
-l ds:0100 2 1 12 gets you FAT."
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks