-
August 6th, 2000, 01:43 PM
#1
Questions about how to turn my USB port on.
I just got a ZipCD USB drive and after plugging it into my computer it does not recognize its there.. if i restart it will detect new hardware and install it.. But hangs at the windows98 screen.. I have to unplug the USB port and restart again to get back into windows.
Any help about reconfiguring my USB or pointing me in the right direction would be great.
-
August 6th, 2000, 01:49 PM
#2
Make sure you have the most recent BIOS update for your motherboard.
------------------
An obstacle is something you see when you take your eyes off your goal.
An obstacle is something you see when you take your eyes off your goal.
-
August 6th, 2000, 02:30 PM
#3
thats something i tried to find out, with no answers.. heh..
I'm not sure how to check that. if you have a free second maybe you can let me know the easiest way to find that out and update it. thanks!
-
August 6th, 2000, 02:34 PM
#4
Oh ya, I have tried looking at the windrivers.com site to find out.. but the things it said to look for I did not see.
I have an IBM Aptiva.. im not sure what motherboard i have unfortunately.
-
August 7th, 2000, 09:47 AM
#5
What model, Processor speed, and any other info, like bios date.
You might be able to get some of this info in CMOS.
------------------
An obstacle is something you see when you take your eyes off your goal.
An obstacle is something you see when you take your eyes off your goal.
-
August 8th, 2000, 12:40 AM
#6
I have an IBM Aptiva, Model 2137-E85
BIOS info:
Version- JW3EN3F
Date- 05/20/98
IBM5D000-M12-980520-R03-F0 BO EN
I believe my USB manufacturer is ACER Labs Inc. Device Manager/Universal serial bus controller/ALi PCI to USB Open Host Controller. The date of that is 05/11/1998.
Here is some basic system info.
------------------
System Information
------------------
Operating System: Microsoft Windows 98 (4.10, Build 1998)
Language: English (Regional Setting: English)
Processor: AMD-K6(tm) 3D processor, MMX, 3DNow, 300MHz
Memory: 64MB RAM
Page File: 49MB used, 1934MB available
DirectX Version: DirectX 7.0 (4.07.00.0716)
DxDiag Version: 4.07.00.0700
Originally posted by Eagle PC Diagnostech:
What model, Processor speed, and any other info, like bios date.
You might be able to get some of this info in CMOS.
-
August 8th, 2000, 09:02 AM
#7
http://www.pc.ibm.com/qtechinfo/MIGR...va%7C2137&mode l=IBM+Aptiva%7CAptiva%7C2137%7CE85&doctype=Downloa dable+files&subtype=BIOS
FOLLOW THE INSTRUCTIONS FOR (VPD) Vital Product Data
------------------
An obstacle is something you see when you take your eyes off your goal.
[This message has been edited by Eagle PC Diagnostech (edited August 08, 2000).]
An obstacle is something you see when you take your eyes off your goal.
-
August 8th, 2000, 03:49 PM
#8
I thought that was for somthing to do with the IBM Connection setup? Kinda like what Microsoft has for Windows as an updater?
do you think that will fix my USB ports?
I talked to the guys over at Iomega and they said something about updating my "ALi PCI to USB Open Host Controller" to "ALi PCI to USB Universal Host Controller"
and to do that I had to go to http://www.acerlabs.com/eng/support/driver.shtml to get some update at the bottom of the page. well after going there and reading the .txt it had on the update, it said that windows 98 already had the update and there is no need for it.
so if windows98 already has it.. what am I to do?
-
August 8th, 2000, 04:06 PM
#9
It can't hurt
It will probably update several devices and software
------------------
An obstacle is something you see when you take your eyes off your goal.
An obstacle is something you see when you take your eyes off your goal.
-
August 10th, 2000, 04:44 PM
#10
Tried it.. nothing.. it was only to fix my model and s/n if it was wrong.. but it was correct.
I was going to try that ALi update, but it said I need to run something from Microsoft called usbsupp.exe first then use the update.. well i dont have that file and i looked on the microsoft site for it and could not find a download..
i think what the ALi ment when they said win98 has the update already... maybe they ment win98 second edition? i believe i have the first.
it sucks.. i may have to spend $200+ to get a new copy of windows98! and i am not even sure if that will fix my problems.
-
August 11th, 2000, 08:46 AM
#11
That usbsupp.exe was for Win95
It is included with 98 and 98SE
Post your problem in the Tech To Tech Forum
You have the right Operating System, There is something about the Ali chipset that is causing the USB to not work. The Tech's in that forum would probably give you enough Ideas to resolve your problem.
An obstacle is something you see when you take your eyes off your goal.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks