-
April 20th, 1999, 02:30 AM
#1
[RESOLVED] "Buffer Underrun" error when recording cds
Help. I have tried everything.
When I try to write a data or an audio cd
with my Teac R55S SCSI CD-Recorder, it fails.
My SCSI controller is an Adaptec 2910C and
my SCSI CD-ROM is a Plextor 40X Ultraplex.
I 've really tried everything. I 've reinstalled WIN98, I 've changed the SCSI IDs
and checked the termination. I 've also tested these cd-roms in another computer and
worked perfect! :-(
-
April 20th, 1999, 09:06 PM
#2
.
[This message has been edited by Darren Wilson (edited April 20, 1999).]
-
April 20th, 1999, 09:12 PM
#3
Update you're ASPI drivers from http://www.adaptec.com/support/overview/windows98.html first. Then try writing CD's at a slower speed than you are trying to write ( i.e. 1X instead of 2X ). If this fails try copying files from the HDD .
Your reader should be the last device on the SCSI bus ( apart from the Card ( i.e. Terminated )and your writer should be the next number down. If your card supports it ( I don't know as I have not used a 2910 ) drop the transfer rate down to 5Mb or 10Mbs .
This has cured a lot of my probs in the past. Also ensure that there is adequate ventilation & cooling in the system as SCSI devices get very HOT and this can cause under runs also. In the ideal world the reader & writer should be placed in the case as far from each other as possible.
Good Luck & I hope you solve you're problem.
-
April 21st, 1999, 04:16 AM
#4
-
April 22nd, 1999, 07:20 PM
#5
YOUR BUFFER ON YOUR CD-ROM DRIVE IS ALLOWED TO EMPTY. YOU MUST SHUT DOWN ALL OTHER RUNNING PROGRAMS TO GIVE YOUR CD-ROM BUFFER UNINTERRUPTED DATA.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks