[RESOLVED] dead HDD or M/B ?
Results 1 to 4 of 4

Thread: [RESOLVED] dead HDD or M/B ?

  1. #1
    cb
    Guest

    Resolved [RESOLVED] dead HDD or M/B ?

    I got a Canon Innova Laptop that wont boot. The bios recognizes the HDD but upon bootup it comes "no operating system found".
    Using a boot disk, it will still not boot.
    Using a Partition Magic boot disk, it starts the program, then stalls just before it shows the details.
    So, is this a dead hard drive or could it be the motherboard??

  2. #2
    Registered User
    Join Date
    Nov 1998
    Location
    dallas,tx 75228
    Posts
    69

    Post

    Have you tried booting to a boot disk with the HDD out of the system?
    If it boots ok that way, then you have the answer...Bad HDD. If it won't, the it's time for a M/B.

  3. #3
    Registered User
    Join Date
    Aug 2000
    Location
    San Antonio TX
    Posts
    264

    Post

    actually before you replace the MB, you might want to reseat the mem first and try again.

    Make sure all the screws are tight as well.

    ------------------
    hey its me again!
    hey its me again!

  4. #4
    Jallentino
    Guest

    Post

    Reseat the RAM and the processor, but it sounds like MoBo to me....Also, remove any Peripheals or PCMIA cards before you boot.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •