-
September 21st, 2000, 08:05 AM
#1
[RESOLVED] dead HDD or M/B ?
I got a Canon Innova Laptop that wont boot. The bios recognizes the HDD but upon bootup it comes "no operating system found".
Using a boot disk, it will still not boot.
Using a Partition Magic boot disk, it starts the program, then stalls just before it shows the details.
So, is this a dead hard drive or could it be the motherboard??
-
October 5th, 2000, 11:20 PM
#2
Have you tried booting to a boot disk with the HDD out of the system?
If it boots ok that way, then you have the answer...Bad HDD. If it won't, the it's time for a M/B.
-
October 6th, 2000, 01:03 PM
#3
actually before you replace the MB, you might want to reseat the mem first and try again.
Make sure all the screws are tight as well.
------------------
hey its me again!
-
October 7th, 2000, 09:42 PM
#4
Reseat the RAM and the processor, but it sounds like MoBo to me....Also, remove any Peripheals or PCMIA cards before you boot.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks