[RESOLVED] Drivers for Compaq 7360DMT

[Alisio]

After installing W98 my cdrom drive which swaps out with the diskette drive doesn´t work properly.
The system is unable to find it and even it doesn´t appear when I look for it.
It seems that the driver is wrong or dissapeared.
Can anybody help me?
I can't use either the cd-rom or the diskette drive.
Compaq Armada 7360DMT


[This message has been edited by Alisio (edited March 22, 2001).]

[DonJ]

You might try Compaq's website below for your model:

http://www.compaq.com/support/files/...ate/4_916.html

It has links for Documentaion & White Papers...some good info there for updating to Win98. Might be something to look into.

For a selection of Win98 drivers from Compaq, go here:

http://www.compaq.com/support/files/...ocOsCat/4.html

Good Luck!
DonJ


------------------
Hey, it's all FM to me!

[Alisio]

I´ve visited Compaq site several times but perhaps I´m quite a slow and i couldn´t find that driver.
Thank to you for your fast answer.

[KWB Teck]

Read the reply I left to the SAME POST you made in the CD Rom / CD Rom Drivers sig on this forum.

[DonJ]

<font face="Verdana, Arial" size="2">Originally posted by KWB Teck:
Read the reply I left to the SAME POST you made in the CD Rom / CD Rom Drivers sig on this forum.</font>

http://forums.windrivers.com/cgi-bin...ML/001038.html

DonJ


------------------
Hey, it's all FM to me!

[Alisio]

This is my autoe3xec.bat:

c:\windows\command\mscdex /D:mscd001
mode con codepage prepare=((850) C:\WINDOWS\COMMAND\ega.cpi)
mode con codepage select=850
keyb sp,,C:\WINDOWS\COMMAND\keyboard.sys

and this is my config.sys:

device=oakcdrom.sys /D:mscd001
device=C:\WINDOWS\COMMAND\display.sys con=(ega,,1)
Country=034,850,C:\WINDOWS\COMMAND\country.sys

I have some trouble when I try to swap the devices. The system hangs up and I have to reboot.
And there´s a yellow mark in the list of drivers in My PC.

I´m getting desperated.

and I visit the Compaq site again and again but perhaps I do not know what to look for.