[RESOLVED] compaq 1275 w/ bsd
Results 1 to 6 of 6

Thread: [RESOLVED] compaq 1275 w/ bsd

  1. #1
    robbydobby
    Guest

    Post compaq 1275 w/ bsd

    hey all well working on a laptop for a client having probles gett the bluse screen of death when it starts up no matter if in safe or normal mode changed memory and installed windows 98se on it still nothing any other sugestions???

    ------------------
    How do I set my laser printer to "stun"?
    I can't back up my hard drive, there's no reverse button.

  2. #2
    MegaMod DonJ's Avatar
    Join Date
    Aug 2000
    Location
    San Antonio, Texas
    Posts
    2,685

    Exclamation

    Hi,

    I would try removing all non-essential cards such as modems, sound cards, NIC's, etc. Also, check output voltages of your power supply. Reboot and see what happens.

    BTW, your Service Manual is located here:

    http://www.compaq.com/athome/support/msgs/1255-1275/

    Also, drivers for your model are located here:

    http://web14.compaq.com/falco/sp_lis...5&cat=Notebook

    Good Luck!
    DonJ


    ------------------
    Hey, it's all FM to me!


    [This message has been edited by DonJ (edited March 15, 2001).]
    I'm good enough.
    I'm smart enough.
    And doggone it,
    People like me!

  3. #3
    robbydobby
    Guest

    Post

    well don its a laptop nothing installed in the pcmcia slot its right when it loads in to windows it geives me the blue screen of death w/ a location on most likely a hdd location since i changed memory on it and still get the same error no mater if i go in to safe mode of in to normal took battery out unhoked power and rest the defaults in bios and still get the same thing

    ------------------
    How do I set my laser printer to "stun"?
    I can't back up my hard drive, there's no reverse button.

  4. #4
    robbydobby
    Guest

    Post

    the error says

    safe mode
    "fatal exception 0d has ocurried at 045F:00002a69"

    normal mode
    "fatal exception 0d has ocurried at 045F:00002a69"

    by the way error comes b4 i can get in to windows see the mouse but it won't move then bsd

    ------------------
    How do I set my laser printer to "stun"?
    I can't back up my hard drive, there's no reverse button.

    [This message has been edited by robbydobby (edited March 15, 2001).]

  5. #5
    MegaMod DonJ's Avatar
    Join Date
    Aug 2000
    Location
    San Antonio, Texas
    Posts
    2,685

    Exclamation

    You might try WinDrivers' link below for errors such as yours:

    http://www.windrivers.com/tech/troub...exceptions.htm

    Hopefully, you'll find what you're looking for.

    DonJ


    ------------------
    Hey, it's all FM to me!
    I'm good enough.
    I'm smart enough.
    And doggone it,
    People like me!

  6. #6
    Jpbtennisman
    Guest

    Post

    I don't really have a very suitable solution to your problem, but I also have a Compaq 1275 which I'm not using anymore. I upgraded the system to Windows 2000...you may want to consider doing that once you get rid of your problem.

    As for your problem, I'd simply recommend re-installing another Windows OS alongside it (like ME, or preferably 2000).

    Have you already tried re-installing Windows 98 from the install CD? I called the idiots at Com-crap myself and I asked them to send me a W98SE CD free of charge...but your warranty has probably expired. If not try this before installing another OS.

    If you don't even want to do that, just try using Mode 4 at the start-up screen (Step-By-Step confirmation) and don't initialize any drivers except the necessary ones.

    And by the way, when you are confirming choices, DO NOT press Y when asked about anything in c:\hibernat\ cuz you have to hit Y or N to like 300 other choices..I learned the hard way :-(

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •