-
January 30th, 2001, 05:51 PM
#1
-
January 30th, 2001, 07:16 PM
#2
I like anything with a TI chipset. They're usually inexpensive and work very Well.
------------------
You can't triple-snap a double-snap!! You can't triple-snap a duoble-snap!!
-
January 30th, 2001, 07:44 PM
#3
have a small network at home of 3 machines
2 have netgear fa311 cards and the third has a linksys card
all are 10/100
also using a netgear router
and having no trouble with any of it
------------------
"May the force be with you ." Obi-Wan Kenobi
[This message has been edited by Mustang (edited January 30, 2001).]
-
January 30th, 2001, 09:07 PM
#4
I never had any serious problems with 3Com 90x cards but If you like something else I would highly recommend the Intel 55x based cards (I love the Intel Pro 10/100+ )
------------------
Computers do exactly what you tell them to do - not exactly what you want them to do ...
-
January 30th, 2001, 10:22 PM
#5
I agree with Condor, if you don't want problems go with an Intel Pro 100+, there are a few different models. I can not stand anything 3Com. I know everyone has their opinions but I've seen enough 3Com crap to know to stay away.
------------------
Born to Network
-
February 1st, 2001, 07:08 PM
#6
<font face="Verdana, Arial" size="2">Originally posted by iamtheman:
I can not stand anything 3Com. I know everyone has their opinions but I've seen enough 3Com crap to know to stay away.</font>
I've had just the opposite experience. Chevy or Ford? Ford or Chevy? It's interesting how a bad experience skews our thinking forever.
I just installed four D-Link DFE-530TX+ into both Win98SE and W2K computers without any problem. I picked up those little suckers for only $15 each at Office Depot about a month ago. They're just giving them away...
------------------
Sometimes computer problems require extreme measures. Our hero, the Intrepid Spaceman Spiff, sets his blaster on "deep fat fry..."
-
February 2nd, 2001, 02:42 PM
#7
I would AVOID ANY REALTEK BASED CARD under windows 2000 - they have lots of problems working in 100Mbit Full duplex !
I had a problem with about 15 cards that didn't work on full duplex in windows 2000 (not in auto negotiation or manual) finally I switched them manually to half duplex and voila - they were working.
we tried the built in drivers as well as d-link and realtek reference drivers (that just messed up the systems).
If you buy any just use the built in win2000 driver and use half-duplex
We ended up replacing all the realteks to 3Com 905b tx-nm and 905c - without any problems.
------------------
Computers do exactly what you tell them to do - not exactly what you want them to do ...
-
February 2nd, 2001, 03:02 PM
#8
Agreed
We use Intel Pro Management 10/100+ for quality/performance
D-Link DFE-530TX Rev A3 or 3COM 90X for performance
or Realtek for cheapskates.
Martin
-
February 5th, 2001, 09:54 AM
#9
I would highly recomend Netgear FX310 or Fx311 cards for economy. I like Netgear cause they are a bay networks company. I have never had any problems with the 3com 3c905x series I personally like them alot jsut dont install all that diagnostic junk that comes with them. If you are having problems with the 3coms I would have to agree with the guys above about the Intel cards being a great highend card.
I would rather use a cut to fit isa than a Linksys but thats just my opinon. X
[This message has been edited by x_789 (edited February 06, 2001).]
-
February 5th, 2001, 10:11 AM
#10
The D-Link DFE-530TX or TX+ cards are awesome.... I've installed them in dozens of machines with little to no problems. I haven't used them under win2k so i'm not sure about that but in any 9x they are flawless. Good Luck, Ian.
------------------
You make me com...
You make me complete...
You make me completely miserable.
--Lit, Miserable.
Ticking away the moments that make up a dull day. Fritter and waste the hours in an off hand way. ---Pink Floyd
-
February 5th, 2001, 11:10 AM
#11
I use 3com 905xx and DFE530TX.. they work fine in 2000 btw. I prefer the few Intel cards we use, they are really good. I recommend Intel pro 100 cards, the drivers are really good. You can team them etc.. Really solid.
------------------
And Control Enter STILL wont let me post a reply.
And Control Enter STILL wont let me post a reply.
-
February 6th, 2001, 02:50 PM
#12
Intel, D-Link, Kingston
------------------
An obstacle is something you see when you take your eyes off your goal.
An obstacle is something you see when you take your eyes off your goal.
-
February 6th, 2001, 03:44 PM
#13
For personal use the DLINK 530 mentioned above is great. It does the job and won't clean out your bank account if you need three or four of them!
For business use or mission critical applications, I'd pick a 3com 905 series card any day. Just make sure you get the latest drivers.
------------------
sHIFT hAPPENS11
-
February 7th, 2001, 09:29 AM
#14
Registered User
It is quite personal Opinion BUT
I like 3Com 90xx Series NICs
they have the best Price/Performance/Troubleshooting Ratio
But other will argue
One thing for sure - Don't buy a cheap LAZY card - cause it will drive you crazy ( ) @ the end of the Day.
------------------
*************************
It Works Better if you Plug it in, It Works far better if you Turn it ON!
Real stupidity beats Artifical Intelligence
Avatar courtesy of A D E P T
-
February 8th, 2001, 05:54 PM
#15
My real world experience with NIC's is this.
Realtek, DLink, any cheap cards are most likely made by a company called Accton, an OEM manufacturer. Have you heard a saying, "You get what you pay for"?
I actually use a Realtek at home, but in a work environment no way. One reason only, they tend to do a little too much broadcasting.
I myself have had issues with 3Com products, so I switched to Intel cards. The main reason i use Intel is administrative, one floppy disk for the driver, lets see 3COM do that with all the 3C90x models.
Thats my 2 cents (Canadian money not worth much).
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks