-
February 12th, 2001, 02:17 PM
#1
Networking Prob
This is probbably super simple but there goes.. Main dial in box running win2k pro. This connection is shared with 6 other boxes runnind 2k, 9x or ME. These can all browse the network fine and browse the web fine when they get their IP's automatically. Heres the thing, when i try to specify IP's to the other boxes, not the dial in, so i can map say the http requests to another box the machines can't 'get out' past the dial in box. I've given them all internal IP's and used 192.168.0.1 as the gateway as this is the internal IP of the dial in box. Whats wrong? Am i being super dumb as i think i am.
Any help would be great...
Tom
-
February 12th, 2001, 03:55 PM
#2
What was the scope for the network before you switched to static ip addresses. Try using the numbers in that scope. Also you might need to configure a gateway and dns setting. What are you using to proxy out the requests?
------------------
MCP, A+
To each his/her own.
-
February 12th, 2001, 04:09 PM
#3
Sorry if i appear a bit lacking on terminology but i never finished my MCSE ;-) The IP assigned to the dial in box, win2k, is 192.168.0.1 so i use this as the gateway for the other boxes on the network. The subnet is 255.255.255.0 and all the IP's of the other boxes are in the 192.168.* range. They can browse internat intranet stuff but can't get out past the dial in box. The requests would be going out through a win2k box with a dialup.
Any thoughts??
-
February 12th, 2001, 04:18 PM
#4
Ahhh ha :-)) Sorted it. I had to specify DNS servers for the boxes as under investigation i could ping externam IP's but not domains. DNS was added and bingo all boxes can browse onse more with static internal IP's :-)
Thanks again for the tip.
Tom
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks