[RESOLVED] Generic Win95 Driver for IDE CD-ROM
Results 1 to 3 of 3

Thread: [RESOLVED] Generic Win95 Driver for IDE CD-ROM

  1. #1
    Petercip
    Guest

    Generic Win95 Driver for IDE CD-ROM

    I received a machine that had a network install of Win95, meaning no cabinet files were installed so I cannot install my Toshiba XM-6402B CD-Rom drive. I need the generic ATAPI/ASPI Driver(inf file) which is built in Win95. Is there anywhere to get this generic driver or is it impossible.
    Thanks

  2. #2
    Registered User CompuDocs's Avatar
    Join Date
    Mar 1999
    Location
    Loves Park, Illinois USA
    Posts
    323
    Not familiar with that particular model, but if it's IDE, just make sure that you have it set correctly with the jumpers (master/slave) and windows should detect it.
    If it is not a slave to the hdd, and on the secondary port, make sure the port is enabled in the bios.

    Good luck,

    Charlie
    "Oh Bother," said Pooh, as Windows crashed for the umpteenth time.

  3. #3
    Mustang
    Guest
    you can get a generic oak technologies driver for ide atapi drives from this site

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •