-
October 4th, 2002, 11:06 AM
#1
my parrellel ports is not working on any device
I have P4 1.8 G and windows XP.
-
October 4th, 2002, 12:09 PM
#2
Driver Terrier
OK, could you be a bit more explicit?
What is your parallel port set to in bios? - What are the available settings?
What devices have you tried?
Does the port show up in device manager?
Never, ever approach a computer saying or even thinking "I will just do this quickly."
-
October 4th, 2002, 01:10 PM
#3
thank for the relp, I try my print and other device they are working on my other computer. can you tell where in my bios will I fine that information.
-
October 4th, 2002, 03:18 PM
#4
Driver Terrier
Depending on the bios - usually under integrated peripherals.
Never, ever approach a computer saying or even thinking "I will just do this quickly."
-
October 4th, 2002, 05:37 PM
#5
this is what I fine:
onboard serial port 1 [3f8h/irq4]
onboard parallel port [378h/irq7]
parallel port Mode
-
October 4th, 2002, 07:38 PM
#6
Registered User
IRQ looks fine.
what setup and choices u have under parallel port mode ?
(arrow down on it and
U should have :
-disable
-enale (auto)
ECP
EPP
try enable (or auto, aka os dependent)
keep us posted.
C'est la Vie...
"I invented it, Bill made it famous." ~ David Bradley
(wrote the code for Ctrl-Alt-Delete on the IBM PC)
"You know you're a geek when... You try to shoo a fly away from the monitor with your cursor." ~ Juuso Heimonen
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks