-
September 22nd, 2003, 03:06 PM
#1
Registered User
wireless help
I've set up a dlink DI-614+ router wired to 2 pc's fine, and now I am trying to setup a wireless one. It is using a robanton usb wireless adaptor in win2k, and the monitoring software says it's connected but there is a red x through it and I can't connect to the internet or the network. I'm on the same workgroup and ssid. If I tell the configuration software to connect in ad-hoc mode, it say's it is connected and the red x goes away but I can't reach the network or internet. Should I try a different usb adaptor?
I haven't had a problem with this model before, I've set up a few wireless networks with them ok. This one is driving me crazy.
"You've been livin' on the razor's edge, since you began to shave...
Make sure you live, you're a long time dead, cradle to the grave"-Motorhead
-
September 24th, 2003, 12:32 AM
#2
Registered User
Ahh Yes...
Originally Posted by cabal
I've set up a dlink DI-614+ router wired to 2 pc's fine, and now I am trying to setup a wireless one. It is using a robanton usb wireless adaptor in win2k, and the monitoring software says it's connected but there is a red x through it and I can't connect to the internet or the network. I'm on the same workgroup and ssid. If I tell the configuration software to connect in ad-hoc mode, it say's it is connected and the red x goes away but I can't reach the network or internet. Should I try a different usb adaptor?
I haven't had a problem with this model before, I've set up a few wireless networks with them ok. This one is driving me crazy.
I had roughly the same problem...I was able to solve it with the cool people here...
http://forums.windrivers.com/cgi-bin...ad.php?t=51481
Anyway, one question; what are properties of the wireless connection in control panel? In other words, what types of protocols and crap are installed? I realized I needed NetBios on all 3 of my computers, and I had to enable NetBios over TCP/IP.
The link to the post above should help. If not post again, and I'll try to go into detail...as I said, I didn't know crap until I was helped on the forums here.
Good luck!
"I am an expert of electricity. My father occupied the chair of applied electricity at the state prison." - WC Fields
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks