-
December 31st, 2003, 12:19 AM
#1
Mandrake Linux LCD Notebook Setting
Hi,
I'm a newbie in Linux OS. I already install Linux Mandrake 9.2 in my Dell Inspiron N/book but the problem is happen with tha LCD panel. The display for Linux only 7" compare than the actual size of LCD (15"). I have to move the cursor left,right, down and above to look the whole Linux. I would like to know how to configure to get the actual size of display. If I not wrong the file that I need to edit is under X11 directory.
thanks.
-
December 31st, 2003, 10:29 AM
#2
Registered User
sounds like you have the "expanded desktop feature on" Not sure what the right name for it is
Not to sure on mandrake (never used it) but you might beable to recondifure X. Using the "xf86config" tool from the command prompt. Note: you could mess things up if your not sure how to configure X.
All the settings for X are stored in a file called "XF86Config" this is located in "/etc/X11"
can I have you open a text editor of your choice and open this file.
/etc/X11/XF86Config
copy and paste it in here? We might beable to edit the X file without you going into the "xf86config" tool
-D
-
December 31st, 2003, 11:24 PM
#3
/etc/X11/XF86Config [paste from my Linux]
# /.../
# SaX generated XFree86 config file
# Created on: 2003-12-30T11:37:19+0800.
#
# Version: 4.7
# Contact: Marcus Schaefer <[email protected]>, 2002
#
# Automatically generated by [ISaX] (4.7)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/mouse"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
InputDevices "/dev/pointer0"
InputDevices "/dev/pointer1"
InputDevices "/dev/pointer2"
InputDevices "/dev/pointer3"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail"
EndSection
Section "Module"
Load "freetype"
Load "extmod"
Load "type1"
Load "v4l"
Load "speedo"
Load "dbe"
Load "glx"
EndSection
Section "InputDevice"
Driver "Keyboard"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "pc104"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Device" "/dev/mouse"
Option "Emulate3Buttons" "on"
Option "Name" "Autodetection"
Option "Protocol" "ps/2"
Option "Vendor" "Sysp"
EndSection
Section "Monitor"
Option "CalcAlgorithm" "CheckDesktopGeometry"
DisplaySize 320 240
HorizSync 28-82
Identifier "Monitor[0]"
ModelName "1280X1024@60HZ"
Option "DPMS"
VendorName "--> LCD"
VertRefresh 40-60
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1280x1024" 105.15 1280 1360 1496 1712 1024 1025 1028 1059
Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +HSync +VSync
Modeline "640x480" 23.06 640 656 720 800 480 481 484 497
EndSection
Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "Device"
BoardName "i845"
BusID "0:2:0"
Driver "i810"
Identifier "Device[0]"
Screen 0
VendorName "Intel"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
xxxxxxxxxxxxxxxxxxxxxxxx
thanks for your reply
-
January 1st, 2004, 12:30 AM
#4
Registered User
You have the wrong monitor selected (x11 is known to make this mistake). My guess is that your monitors native resolution is only 1024x768 (according to the driver). What type of video card does the laptop have?
"I feel like one of those mass murderers on death row. I never understood how the hell they got more chicks than I did. Now I know. They sold crap on eBay." -- Anonymous ebayer
"I figured out what's wrong with life: it's other people." -- Dilbert
-
January 1st, 2004, 12:45 AM
#5
video card type
I think this is the type of AGP card (built-in)
Intel(R)82845G/GL/GE/PE/GV Graphic Controller 6.13.01.3460
Digital Flat Panel (1024 X 768)
-
January 1st, 2004, 12:59 AM
#6
Registered User
Originally Posted by roha
Digital Flat Panel (1024 X 768)
Bingo. What we need to do is find out the exact vert and horz refresh rates of the monitor. I'll dig around more later. You could try running the xf86Config utility (or whatever it is for your flavor of linux) and "force" it to use 1024x768. Cheers.
"I feel like one of those mass murderers on death row. I never understood how the hell they got more chicks than I did. Now I know. They sold crap on eBay." -- Anonymous ebayer
"I figured out what's wrong with life: it's other people." -- Dilbert
-
January 1st, 2004, 02:01 AM
#7
1024x768
I already fix my monitor to 1024 X 768. But no change with the display.
thanks
-
January 2nd, 2004, 04:52 PM
#8
Registered User
cant you use xf86config ???
-
January 3rd, 2004, 04:44 AM
#9
How to use it?
"cant you use xf86config "
I'm a newbie in Linux OS. Sorry to say that, I don't know how to use or running xf86config.
sorry
-
January 4th, 2004, 10:55 PM
#10
Registered User
at the command prompt, or out of Xwindows type
xf86config and follow the directions.
befiore you do this, back up your XF86Config file.
also you might want to try xf86cfg I think thats the xwindows version. I dont use it.
but hope that helps
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks