-
February 29th, 2004, 03:00 PM
#1
Registered User
vpn questions
I have a couple of Linksys BEFVP41 vpn routers. I've got both of them on broadband connections with dynamic ip's that rarely change. I've got a vpn tunnel created between the two. I cannot figure out, however, to use this tunnel to connect the two networks. The computers connected to the vpn routers all have win xp and win 2000 machines connected to them. The computers are all being assigned dynamic ip's by the routers. The two networks have different workgroup names and different ip schemes. Network 1 using 192.168.2.xxx scheme and Net 2 using 192.168.1.xxx scheme. Has anyone in here successfully done this? I would really appreciate any help anyone can give me on this.
-
February 29th, 2004, 03:11 PM
#2
Chat Operator
Originally Posted by tobevers
I have a couple of Linksys BEFVP41 vpn routers. I've got both of them on broadband connections with dynamic ip's that rarely change. I've got a vpn tunnel created between the two. I cannot figure out, however, to use this tunnel to connect the two networks. The computers connected to the vpn routers all have win xp and win 2000 machines connected to them. The computers are all being assigned dynamic ip's by the routers. The two networks have different workgroup names and different ip schemes. Network 1 using 192.168.2.xxx scheme and Net 2 using 192.168.1.xxx scheme. Has anyone in here successfully done this? I would really appreciate any help anyone can give me on this.
you need a pair of routers to "route" between the networks (go into yorur routing tables and set things up), your you cheat and change the subnet mask to 255.255.0.0 so that they are all on the "same" network
<Ferrit> Take 1 live chicken, cut the head off, dance around doing the hokey pokey and chanting: GO AWAY BAD VIRUS, GO AWAY BAD VIRUS
-----------------------
Windows 7 Pro x64
Asus P5QL Deluxe
Intel Q6600
nVidia 8800 GTS 320
6 gigs of Ram
2x60 gig OCZ Vertex SSD (raid 0)
WD Black 750 gig
Antec Tri power 750 Watt PSU
Lots of fans
-
March 5th, 2004, 09:13 AM
#3
What sort of evidence do you have that you have a succesful tunnel between the routers?
Can you ping from one router to the other? Can you ping from a workstation on Lan 1 to the router hosting Lan 2?
You need to ascertain whether you have basic ICMP traffic between the lans before you can do anything higher level.
*lin*
I actually voted for John Kerry, before I voted against him.
-
May 19th, 2004, 10:27 AM
#4
Hi everyone,
Just wondering if this issue was ever resolved.
I am setting up a VPN and am having the same issues. My 2 networks are 192.168.0.x and the other is 192.168.1.x, both with subnet 255.255.255.0
I can establish a connection through the tunnel, but I can not brouse to any network shares. I can ping from one network to the next, and I can even log in to the linksys router on the other network.
If i try to search for a computer name on the other network it does not find it.
All computers are using windows 2000 pro. The routers are linksys BEFVP41 and the WRV54G.
-
June 2nd, 2004, 03:01 AM
#5
Registered User
Been a while since I checked this post. I did get the VPN working. I could tell the tunnel was in place because Linksys lists tunnel status as connected or disconnected. I never could find computers (from local network) on remote network through My Network Places/Network Neighborhood. I searched for computers using remote IP addresses and found them that way, then created shortcut to them on desktops. Could also use Add Network Place in Network Neighborhood/My Network Places to "map" remote computers. A simple solution that obviously should've occurred to me. Sometimes a guys gotta walk away, relax, then come back to problem. Solution magically appears.
Similar Threads
-
By ilovetheusers in forum Tech-To-Tech
Replies: 4
Last Post: May 6th, 2002, 06:15 PM
-
By ClimbingBoater in forum Networking
Replies: 5
Last Post: November 21st, 2001, 10:23 AM
-
By deh1217 in forum Networking
Replies: 1
Last Post: November 1st, 2001, 03:37 PM
-
By Hell_Fire in forum Tech Lounge & Tales
Replies: 0
Last Post: July 6th, 2001, 07:16 AM
-
By Hell_Fire in forum Windows NT/2000
Replies: 0
Last Post: July 6th, 2001, 06:51 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks