MS-6330 ver: 2.1
Page 1 of 9 1 2 3 ... LastLast
Results 1 to 15 of 122

Thread: MS-6330 ver: 2.1

  1. #1
    Registered User tobevers's Avatar
    Join Date
    Dec 2001
    Location
    South Dakota
    Posts
    81

    MS-6330 ver: 2.1

    I'm looking for a manual on a Microstar mobo. Its a MS-6330 ver: 2.1 board. I can't find anything on this bugger. It's a Gateway OEM and and I don't know which Gateway machine it comes out of. The part number on the board is MS-6630-BO and the ref. # is 4000807.
    Any help is GREATLY appreciated.

  2. #2
    Registered User hudsonsmith's Avatar
    Join Date
    Feb 2003
    Location
    New York
    Posts
    2,276
    Well, if you look on this page there are manuals for the MS-6330 Lite and MS-6330 LE3. Don't know if it is close enough for your purposes. There's also a manual for the 1.0B here.
    Probability factor of one to one...we have normality, I repeat we have normality. Anything you still can't cope with is therefore your own problem.

  3. #3
    Registered User tobevers's Avatar
    Join Date
    Dec 2001
    Location
    South Dakota
    Posts
    81
    Nope, I've already found those. The boards are a little different. I appreciate the effort, though.

  4. #4
    Registered User ADS_Tech's Avatar
    Join Date
    Nov 2001
    Location
    Nottingham, England
    Posts
    552
    Came across one of these last year, and couldnt find any info. Seem to remember having trouble getting it to recognize any extra IDE device .
    Gave up searching in the end, but did get it working.
    Its not the same as the standard MSI board as you suspect.
    If the automobile had followed the same development cycle as the computer, a Rolls-Royce would today cost $100, get a million miles per gallon, and explode once a year, killing everyone inside.

    Robert X. Cringely, InfoWorld magazine

  5. #5
    Registered User geoscomp's Avatar
    Join Date
    Apr 2002
    Location
    Minnesota
    Posts
    2,340
    If the gateway part number listed on the board is Part #: MS-6330-BO either v1 or v2, then my books show it as a MSI K7T Turbo oem. try here:
    http://www.msi.com.tw/program/suppor...UID=100&kind=1
    Last edited by geoscomp; June 15th, 2004 at 05:04 PM.
    Computer Rescue Service

    "those who do not remember history are condemned to repeat it."

  6. #6
    Registered User
    Join Date
    Jun 2004
    Location
    NH
    Posts
    1
    Hi, I'm new to the forum and was also having trouble finding info on this board. Then all of a sudden I stumbled onto it quite by accident. Computergeeks.com is having a sale on this mobo right now (which I believe was only manufactured for Gateway), and they have links to Gateway's support site for the product. It isn't a manual, but it had all the information I needed to get my board up and running. Hope this helps.

    http://support.gateway.com/s/MOTHERB...514182tc.shtml

  7. #7
    Driver Terrier NooNoo's Avatar
    Join Date
    Dec 2000
    Location
    UK
    Posts
    31,824
    Welcome to Windrivers Duke and thanks for the tip!!
    Never, ever approach a computer saying or even thinking "I will just do this quickly."

  8. #8
    Registered User
    Join Date
    Jul 2004
    Location
    Baltimore, Maryland
    Posts
    1

    MS-6330 ver.2.1 Manual

    Quote Originally Posted by tobevers
    I'm looking for a manual on a Microstar mobo. Its a MS-6330 ver: 2.1 board. I can't find anything on this bugger. It's a Gateway OEM and and I don't know which Gateway machine it comes out of. The part number on the board is MS-6630-BO and the ref. # is 4000807.
    Any help is GREATLY appreciated.
    Hi tobevers, If you go to http://support.gateway.com/s/MOTHERBD/MSI/2514182, you will be able to download the entireor parts of the manual that you need. Good Luck, see ya.]

  9. #9
    Registered User greazy's Avatar
    Join Date
    Jul 2004
    Posts
    3
    Hello.

    Helpfull thread. I just received my order from a pricewatch company: brand-new 6330 Rev 2.1 MSI M7T 133...blah blah.

    I've just had one problem: can't get into the BIOS settings. Is this even available to do?

    I realize I can't OC with this dern board (SUX) but I'm just hoping to take a peek. I've tried holding down DEL and CONT-ALT-DEL at boot-up , but it just goes directly to my HD/CDROM.

    Thanks for any help.
    Greazy

  10. #10
    Driver Terrier NooNoo's Avatar
    Join Date
    Dec 2000
    Location
    UK
    Posts
    31,824
    Try f2 greazy and welcome to Windrivers.
    Never, ever approach a computer saying or even thinking "I will just do this quickly."

  11. #11
    Registered User greazy's Avatar
    Join Date
    Jul 2004
    Posts
    3
    My next step was to do a broad attack on the keyboard. Thanks. I'll try it when I get back from work. You probably saved me a ton of time trying combos like CONT-ALT-B-I-O-S-P-L-E-A-S-E

    and thanks for the welcome.

  12. #12
    Registered User
    Join Date
    Jul 2004
    Posts
    1
    [the f1 key will get you into the bios on that board

  13. #13
    Registered User greazy's Avatar
    Join Date
    Jul 2004
    Posts
    3
    thanks big. I've found out that it is indeed F1.
    Once I got in, I was able to remove the quick-load, and have it go through the process of checking the memory, identifying IDE items, etc. OH, and it shows 'press F1 to enter setup' in the beginning. Nice.

  14. #14
    Registered User tobevers's Avatar
    Join Date
    Dec 2001
    Location
    South Dakota
    Posts
    81
    thanks, everyone, for all the help on this

  15. #15
    Registered User mplark's Avatar
    Join Date
    Jul 2004
    Location
    Hayward, California
    Posts
    7

    More MS-6330 Ver:2.1 Stuff

    Mr. Duke, I have one of these boards now myself and I can't figure out how to get the power switch to connect to the board. How did you get yours to work? THANK YOU!

    Quote Originally Posted by TheRedDuke
    Hi, I'm new to the forum and was also having trouble finding info on this board. Then all of a sudden I stumbled onto it quite by accident. Computergeeks.com is having a sale on this mobo right now (which I believe was only manufactured for Gateway), and they have links to Gateway's support site for the product. It isn't a manual, but it had all the information I needed to get my board up and running. Hope this helps.

    http://support.gateway.com/s/MOTHERB...514182tc.shtml

Similar Threads

  1. Wanna see a routing loop?
    By silencio in forum Networking
    Replies: 2
    Last Post: May 31st, 2005, 12:09 PM
  2. Can you access this site?
    By riddellcomp in forum Tech Lounge & Tales
    Replies: 18
    Last Post: December 29th, 2003, 06:36 PM
  3. Windows 98 and XP not getting along?
    By Prince Abaddon in forum Networking
    Replies: 27
    Last Post: November 12th, 2002, 11:57 PM
  4. [RESOLVED] Is somebody accessing my comp?
    By PaulK in forum Networking
    Replies: 16
    Last Post: February 13th, 2002, 07:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •