-
September 6th, 2004, 06:44 PM
#1
upgrading my processer
HI, This is my first post here on this forum. I have a older Toshiba Satellite 4000cds Laptop. I've upgraded the memory from stock 32 mb to 160mb and have increased my GB from a measley 4 GB to 40 GB. I've been able to do this on my own at very little cost. Which leads me to my question. I next want to upgrade the processor. This is the info from System Information.
(x86 Family 6 Model 5 Stepping 2 GenuineIntel ~233 Mhz)
Can anybody tell me what is the maximum increase I can do here and and the approx. cost of doing so. Thanks. Dapper
-
September 6th, 2004, 08:49 PM
#2
Registered User
It's been my experience that most all laptop processors are soldered to the board and cannot be opgraded that cheaply if at all
Life's journey is not to arrive at the grave safely in a well preserved body,
but rather to skid-in-sideways, totally worn out, shouting. "Holy sh!t.. what a ride!"
-
September 6th, 2004, 11:19 PM
#3
Registered User
Welcome to windrivers dapper. You've got a Mobile Pentium II w/ a 66MHz fsb. If it is not soldered to the board, the fastest processor you could replace it with would be the 400MHz Mobile PII, in the Mini-Cartridge (not the Micro-PGA) form factor.
Probability factor of one to one...we have normality, I repeat we have normality. Anything you still can't cope with is therefore your own problem.
-
September 7th, 2004, 02:47 PM
#4
Originally Posted by hudsonsmith
Welcome to windrivers dapper. You've got a Mobile Pentium II w/ a 66MHz fsb. If it is not soldered to the board, the fastest processor you could replace it with would be the 400MHz Mobile PII, in the Mini-Cartridge (not the Micro-PGA) form factor.
hudsonsmith, can you look at these two links and let me know if either one of these is what i need ?? thanks again !! john
http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MEWA:IT
http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MEWA:IT
-
September 7th, 2004, 03:48 PM
#5
Registered User
Originally Posted by dapper
Without opening up your laptop its hard to say, but both would be compatible from the standpoint of bus speed. The first link is a Celeron, the second a Pentium II. The 400MHz PII runs at 1.55v, not 1.6v, which might be an issue. I suggest you contact Toshiba to find out whether the processor can be replaced and what the laptop will support.
Probability factor of one to one...we have normality, I repeat we have normality. Anything you still can't cope with is therefore your own problem.
Similar Threads
-
By Shard92 in forum Linux
Replies: 4
Last Post: February 10th, 2004, 01:11 PM
-
By Ronin in forum BIOS/Motherboard Drivers
Replies: 3
Last Post: November 24th, 2001, 11:14 PM
-
By maxcat in forum Windows 95/98/98SE/ME
Replies: 4
Last Post: February 20th, 2001, 05:59 AM
-
By danwr39 in forum BIOS/Motherboard Drivers
Replies: 2
Last Post: July 5th, 2000, 10:14 AM
-
By wierd in forum Windows 95/98/98SE/ME
Replies: 4
Last Post: April 16th, 2000, 07:40 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks