Wireless card problems
Results 1 to 4 of 4

Thread: Wireless card problems

  1. #1
    Registered User
    Join Date
    Sep 2004
    Posts
    2

    Wireless card problems

    Hi,
    Just today i brought a BT Voyager 2100 Wireless ADSL modem router with...

    1x Voyager 1040 PCI card for desktops

    1x Voyager 1060 PC card for laptops


    Hook up the laptop card turn it on, perfect works fine..
    Then comes the PCI, i installed the disk fitted the card into the PCI slot (i only have 1 free) turn on the computer... and nothing, windows didn't detect it so i went out and brought a belkin 802.11g Wireless Desktop Network Card and got the exact same problem.

    Is it faultly PCI Slot, if so what can i do?

    Thanks.

  2. #2
    Registered User
    Join Date
    Aug 2002
    Location
    California
    Posts
    194
    Try another PCI-based piece of hardware in that slot and see if it works. Alternately, try those wireless cards in a PCI slot that you know works.

    Another suggestion: install the drivers from the CD that came with the card first, then put the card in.

    Good luck.
    Last edited by merlinsghost; September 16th, 2004 at 10:18 AM.

  3. #3
    Registered User
    Join Date
    Sep 2004
    Posts
    2
    Thanks for the reply.

    Well, i don't have another PCI peice of hardware so i can't do that

    As for taking out the one of the other 2 i was told the computer wouldn't function properly if i took one of those out because they have needed things.


    Finally, i installed the driver before the device, but i get the error

    This Device cannot start. (code 10)

  4. #4
    Geezer confus-ed's Avatar
    Join Date
    Jul 1999
    Location
    In front of my PC....
    Posts
    13,087
    Code 10 in this context means no resources free so the driver can't start, earlier you were advised to try your card in another slot, this message confirms this 'need' ... Techies call this 'slot shuffle', its not uncommon to 'need' to do this

    When your machine starts up it does a 'sum' based on what resources it has & what IRQs & memory ranges they can have or use, based partially on their physical position in certain slots. In other words each slot has a range of resources it can use & each slots range is different, moving pci devices about will or should allow all these to work together correctly, you want drivers handy for any devices you need to move, though very often windows will detect & install drivers itself especially if it already had drivers (but not always).

    There are other approaches but this honestly is best/simplest ..

Similar Threads

  1. USB2.0 PCMCIA card Win2K install problems
    By lamoid in forum USB/Firewire
    Replies: 1
    Last Post: August 2nd, 2004, 04:52 AM
  2. Share a Printer Using A Wireless Router and Wireless Card
    By alphajoe in forum Internet and Networking
    Replies: 3
    Last Post: July 23rd, 2004, 07:07 AM
  3. USR PCMCIA (wireless LAN) card problem
    By sandbites in forum Internet and Networking
    Replies: 4
    Last Post: July 9th, 2004, 02:21 PM
  4. Dun Broke it, failed pcmcia wireless card install.
    By tommo6666 in forum Tech-To-Tech
    Replies: 3
    Last Post: April 29th, 2004, 11:56 AM
  5. P4 Problems with Visiontek Geforce 2 MX card.
    By Stever in forum Video Adapter/Monitor Drivers
    Replies: 3
    Last Post: May 30th, 2001, 09:37 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •